Control board
pmusgrave·synth_psoc·Hardware/Synth_Control_Board/control_board.kicad_pcb
About the Control board
Control board is an open source PCB design by pmusgrave, published on GitHub. It is a 2-layer board measuring 157.5 × 157.5 mm, with 86 components from 27 distinct parts.
By type, the board carries 25 resistors, 14 capacitors, 13 switches and 9 connectors.
It belongs with the audio and robotics & motion designs in this gallery.
From the project
A drone synthesizer
Control board bill of materials (BOM)
86 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_02x13_Odd_Even | Pin_Header_Straight_2x13_Pitch2.54mm | J1, J3 |
| 1 | AUDIO-JACK-2_SWITCH Conn_01x03 | Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | CAPSENSE_0 Conn_01x08 | Pin_Header_Straight_1x08_Pitch2.54mm | J4 |
| 1 | CAPSENSE_3 Conn_01x05 | Pin_Header_Straight_1x05_Pitch2.54mm | J7 |
| 3 | Conn_01x05 | Pin_Header_Straight_1x05_Pitch2.54mm | J8, J9, J10 |
| 1 | Conn_01x08 | Pin_Header_Straight_1x08_Pitch2.54mm | J11 |
| 4 | 100K-S 20kA | Potentiometer_Bourns_PTV09A-1_Horizontal | RV1, RV2, RV3, RV4 |
| 1 | 100K 10kA | Potentiometer_Bourns_PTV09A-1_Horizontal | RV5 |
| 3 | 100K 20kA | Potentiometer_Bourns_PTV09A-1_Horizontal | RV6, RV7, RV8 |
| 1 | 10KA 20kA | Potentiometer_Bourns_PTV09A-1_Horizontal | RV9 |
| 2 | 10KB 20kB | Potentiometer_Bourns_PTV09A-1_Horizontal | RV10, RV11 |
| 2 | 10KA 20kB | Potentiometer_Bourns_PTV09A-1_Horizontal | RV12, RV13 |
| 8 | 20KA 100kA | Potentiometer_Bourns_PTV09A-1_Horizontal | RV18, RV19, RV20, RV21, RV22, RV23, RV24, RV25 |
| 1 | 20KB 50kA | Potentiometer_Bourns_PTV09A-1_Horizontal | RV26 |
| 1 | 20KB 20kA | Potentiometer_Bourns_PTV09A-1_Horizontal | RV27 |
| 1 | 20KB 50k | Potentiometer_Bourns_PTV09A-1_Horizontal | RV28 |
| 1 | 20KB 10kA | Potentiometer_Bourns_PTV09A-1_Horizontal | RV29 |
| 1 | SW_DPDT_X2 SW_DPDT_x2 | switch_toggle_4.7mm_pitch | SW1 |
| 8 | SW_SPST | switch_toggle_4.7mm_pitch | SW2, SW3, SW4, SW5, SW10, SW11, SW12, SW13 |
| 4 | SW_SPDT | switch_toggle_4.7mm_pitch | SW6, SW7, SW8, SW9 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1UF C_Small | 0805 | C1, C3 |
| 1 | 1UF 10uF | CP_Radial_D8.0mm_P5.00mm | C2 |
| 11 | 22UF C_Small | 0805 | C4, C5, C6, C7, C8, C9, C10, C11 +3 |
| 4 | R | 0805 | R1, R2, R3, R25 |
| 9 | 470K R | 0805 | R4, R5, R6, R7, R8, R9, R16, R17 +1 |
| 9 | 10K R | 0805 | R10, R11, R12, R13, R14, R15, R19, R20 +1 |
| 3 | 100K R | 0805 | R22, R23, R24 |
Control board design files
The KiCad project lives in the pmusgrave/synth_psoc repository on GitHub; these links point at the commit this page was built from.
Control board: common questions
How big is the Control board?
The Control board measures 157.5 × 157.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Control board?
86 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Control board design files?
From the pmusgrave/synth_psoc repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Control board design in my own project?
The repository has no license, so all rights stay with pmusgrave. Use it as a reference, and ask the author before reusing the design.
More boards in synth_psoc
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979