Hot-IMU
popopizza576·Hot-IMU·pcb/hot shoe IMU tracker.kicad_pcb
About the Hot-IMU PCB
Hot-IMU is an open source ESP32 PCB design by popopizza576, published on GitHub. It is a 2-layer board measuring 75 × 35 mm, with 23 components from 19 distinct parts.
Its main chip is the 26892, from the ESP32 family. Other key parts include the TPB4056A20-ES1R. By type, the board carries 8 resistors, 4 connectors, 3 switches, 2 ICs, 2 diodes and 2 capacitors.
It belongs with the sensors designs in this gallery.
From the project
The Hot IMU is an IMU based camera tracker to aid in compositing for videography. No base stations required
The Hot IMU is also incredibly affordable compared to the current Vive-tracker-based solutions. It's also extremely affordable, not requiring base stations, which means you can use it virtually anywhere!
I have created two separate BOMs for my project, because some parts you can't order on Digikey.
The first BOM plugs into Digikeys' lists and allows you to order things like SMD components for your board.
Main components on the Hot-IMU
Hot-IMU bill of materials (BOM)
23 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 26892 ESP32-C3_SUPERMINI_TH | MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | TPB4056A20-ES1R TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U2 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | 0475900001 USB_B_Micro | USB_Micro-AB_Molex_47590-0001 | J1 |
| 1 | 1040310811 Micro_SD_Card | microSD_HC_Molex_104031-0811 | J2 |
| 1 | SSM-104-L-SV-K-TR OLED | PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | SSM-104-L-SV-K-TR BNO085 | PinSocket_1x10_P2.54mm_Vertical_SMD_Pin1Left | J4 |
| 1 | B2B-ZR-SM4-TF Battery | JST_ZH_B2B-ZR-SM4-TF_1x02-1MP_P1.50mm_Vertical | BT1 |
| 1 | RS-282G05A3-SM RT Power | SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | RS-282G05A3-SM RT Start | SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | RS-282G05A3-SM RT Stop | SW_SPST_CK_RS282G05A3 | SW3 |
| 1 | LTST-C171KGKT LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LTST-C170KRKT LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | GRM155R71C104KA88D 0.1 | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | GRM155R61A106ME11D 10 | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 2 | CRCW08051K00FKEA 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | RCWP0575400RGKS6 0.4 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | CRCW08051K20FKEA 1.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 4 | CRCW080510K0FKEA 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8 |
Hot-IMU design files
The KiCad project lives in the popopizza576/Hot-IMU repository on GitHub; these links point at the commit this page was built from.
Hot-IMU: common questions
What microcontroller does the Hot-IMU use?
The Hot-IMU is built around the 26892, from the ESP32 family.
How big is the Hot-IMU PCB?
The Hot-IMU measures 75 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hot-IMU?
23 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hot-IMU design files?
From the popopizza576/Hot-IMU repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hot-IMU design in my own project?
The repository has no license, so all rights stay with popopizza576. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hot-IMU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k