CH554 USBQuadMouseKeyboard
PR77·CH554_USBQuadMouseKeyboard·Hardware/USBQuadMouse.kicad_pcb
About the CH554 USBQuadMouseKeyboard PCB
CH554 USBQuadMouseKeyboard is an open source WCH CH32/CH55x PCB design by PR77, published on GitHub under the MIT license. It is a 2-layer board measuring 61.9 × 21.6 mm, with 24 components from 20 distinct parts.
Its main chip is the CH554T, from the WCH CH32/CH55x family. By type, the board carries 5 connectors, 5 resistors, 4 capacitors, 3 switches, 2 jumpers and 2 diodes.
It belongs with the keyboards, retro computing and usb & debug tools designs in this gallery.
From the project
CH554 based USB to Quadrature Mouse and Keyboard Interface
OLED is also supported so you can see some information for example keyboard and mouse report data.

Main components on the CH554 USBQuadMouseKeyboard
CH554 USBQuadMouseKeyboard bill of materials (BOM)
24 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH554T | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | IRLML6402 | SOT-23 | Q1 |
| 1 | Serial | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | USB_A | USB_A_Molex_67643_Horizontal | J3 |
| 1 | AmigaMouse | DSUB-9_Female_EdgeMount_P2.77mm | J4 |
| 1 | AmigaKeyboard | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | OLED | PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | Buzzer | Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | VBUS | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | 5V | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | SW_BOOT | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1 |
| 1 | SW_BOOTLOADER | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW2 |
| 1 | SW_RESET | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW3 |
| 1 | SS16 | D_SMA | D1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 4 | 100N | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5 |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 10R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5 |
| 1 | 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
CH554 USBQuadMouseKeyboard design files
The KiCad project lives in the PR77/CH554_USBQuadMouseKeyboard repository on GitHub; these links point at the commit this page was built from.
CH554 USBQuadMouseKeyboard: common questions
What microcontroller does the CH554 USBQuadMouseKeyboard use?
The CH554 USBQuadMouseKeyboard is built around the CH554T, from the WCH CH32/CH55x family.
How big is the CH554 USBQuadMouseKeyboard PCB?
The CH554 USBQuadMouseKeyboard measures 61.9 × 21.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CH554 USBQuadMouseKeyboard?
24 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the CH554 USBQuadMouseKeyboard design files?
From the PR77/CH554_USBQuadMouseKeyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CH554 USBQuadMouseKeyboard design in my own project?
Yes, under the terms of its MIT license, which PR77 chose for the repository.
Can I test firmware for the CH554 USBQuadMouseKeyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.
Similar boards
WCH CH32/CH55x
Ps2usb
rasteri
40 × 55 mm25 parts2LNo license428WCH CH32/CH55x
CH552-48
rgoulter
224.6 × 74.2 mm107 parts2LNo license230WCH CH32/CH55x
CH32X-60-ANSI-Improved
rgoulter
285 × 94.2 mm149 parts2LNo license230WCH CH32/CH55x
CH32X-48
rgoulter
224.6 × 74.2 mm112 parts2LNo license230WCH CH32/CH55x
CH32X-75
rgoulter
285 × 94.2 mm318 parts2LNo license230WCH CH32/CH55x
Webusb programmer rev6
laneboysrc
38 × 20 mm18 parts2LMIT87