NeuroGuard
pritikaselvam-svg·NeuroGuard·hardware/kicad/Neuroguard.kicad_pcb
About the NeuroGuard PCB
NeuroGuard is an open source PCB design by pritikaselvam-svg, published on GitHub. It is a 2-layer board measuring 52 × 59.5 mm, with 20 components from 12 distinct parts.
Other key parts include the WEMOS_C3_mini, MAX30102, MPU-6050 and TP4056-42-ESOP8. By type, the board carries 4 ICs, 2 diodes, 1 module, 1 transistor, 1 connector and 1 battery holder.
It belongs with the wearables and power & battery designs in this gallery.
From the project
A multidisciplinary wearable system combining physiological sensing, motion monitoring, embedded electronics and caregiver-facing software for Alzheimer's patient support.
This folder contains the editable KiCad design files for the NeuroGuard wearable PCB.
- NeuroGuard.kicadsch — Complete circuit schematic - NeuroGuard.kicadpcb — PCB layout and routing - NeuroGuard.kicadpro` — KiCad project configuration
- WEMOS C3 Mini / ESP32-C3 - MAX30102 physiological sensor - MPU6050 motion sensor - TP4056 battery charging - 3.3 V regulation - Battery voltage monitoring - Vibration motor driver - Status LED - USB-C power input
Main components on the NeuroGuard
NeuroGuard bill of materials (BOM)
20 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WEMOS_C3_mini | WEMOS_C3_mini | U1 |
| 1 | MAX30102 | PinHeader_1x06_P1.00mm_Horizontal | U2 |
| 1 | MPU-6050 | PinHeader_1x08_P1.00mm_Horizontal | U3 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | Motor_DC | PinHeader_1x01_P1.00mm_Horizontal | M1 |
| 1 | 2N2219 | TO-39-3 | Q1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_Amphenol_124019772112A | J1 |
| 3 | C | C_0805_2012Metric | 0.1uF1, 0.1uF2, 0.1uF3 |
| 7 | R | R_0805_2012Metric | 1k1, 2K1, 5.1K1, 5.1k2, 100k1, 100k2, 220ohm1 |
| 1 | Battery | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
NeuroGuard design files
The KiCad project lives in the pritikaselvam-svg/NeuroGuard repository on GitHub; these links point at the commit this page was built from.
NeuroGuard: common questions
How big is the NeuroGuard PCB?
The NeuroGuard measures 52 × 59.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NeuroGuard?
20 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NeuroGuard design files?
From the pritikaselvam-svg/NeuroGuard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NeuroGuard design in my own project?
The repository has no license, so all rights stay with pritikaselvam-svg. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k