12 open source boards using the WEMOS_C3_mini
Real designs built with the WEMOS_C3_mini, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Exohand Updated
muhammadmapkar
76 × 66 mm26 parts2LNo license0NeuroGuard
pritikaselvam-svg
52 × 59.5 mm20 parts2LNo license0Blare
dipa-cotton
111.9 × 80 mm18 parts2LMIT0Rlcontroller
rujxtastic
31 × 62 mm14 parts2LMIT0Icicle-Alarm-Clock
oSnwy
80.7 × 63.2 mm10 parts2LNo license0Hack alarm clock
sm2322
62 × 61.5 mm6 parts2LNo license0ESP8266
Aeroportal
TheScientist101
100 × 100 mm4 parts2LNo license0- schematic only · 9 parts
Desk-Widget
Randomcoder323
9 partsNo license0 ESP8266
Weather station
hackclub
78 × 52 mm15 parts2LMIT11NXP
Exohand Updated ECTE351
muhammadmapkar
67.5 × 66 mm26 parts2LNo license0Weather
hackclub
50 × 75 mm7 parts2LMIT11ESP32
MaxESP M
EmersonEE
74 × 100 mm61 parts2LNo license0
How designs wire the WEMOS_C3_mini
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the WEMOS_C3_mini connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin is left unconnected on 7 of 9 designs (a signal on 2).
- The 3V3 pin is tied to 3.3V on 6 of 9 designs (a signal on 2).
- The RX pin is left unconnected on 6 of 9 designs (a signal on 3).
- The TX pin is left unconnected on 6 of 9 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENpin 1 | Connected to: Not connected 78% · a signal 22% | — |
| 3V3pin 8 | Connected to: 3.3V 67% · a signal 22% | — |
| GNDpin 10 | Connected to: GND 100% | — |
| RXpin 15 | Connected to: Not connected 67% · a signal 33% | — |
| TXpin 16 | Connected to: Not connected 67% · a signal 33% | — |
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Weather by hackclub, Blare by dipa-cotton, MaxESP M by EmersonEE and Exohand Updated by muhammadmapkar.
The WEMOS_C3_mini in open source designs
The gallery holds 12 open source boards using the WEMOS_C3_mini from 10 GitHub repositories; a typical one measures about 74 × 66 mm and carries around 15 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Weather station by hackclub.
Parts used alongside the WEMOS_C3_mini
What boards using the WEMOS_C3_mini are built for
WEMOS_C3_mini: common questions
Where can I find a WEMOS_C3_mini reference design?
Each of the 12 boards on this page is a real design using the WEMOS_C3_mini. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the WEMOS_C3_mini EN pin connected?
The EN pin is left unconnected on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the WEMOS_C3_mini.
How is the WEMOS_C3_mini 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 6 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the WEMOS_C3_mini.
How is the WEMOS_C3_mini RX pin connected?
The RX pin is left unconnected on 6 of 9 designs (a signal on 3). Counted from the KiCad layouts of 9 open source designs using the WEMOS_C3_mini.
Which microcontrollers do boards using the WEMOS_C3_mini use?
Most are built on ESP8266 (2), NXP (2) and ESP32 (1).
How big is a typical board using the WEMOS_C3_mini?
The median is 74 × 66 mm, and 100% are two-layer designs.
What is the most popular open source board using the WEMOS_C3_mini?
By GitHub stars, Weather station by hackclub, with 11 stars.
Can I simulate one of these boards using the WEMOS_C3_mini before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.