XLRtoBal
About the XLRtoBal PCB
XLRtoBal is an open source PCB design by profdc9, published on GitHub. It is a 2-layer board measuring 85 × 93 mm, with 62 components from 22 distinct parts.
Other key parts include the THAT1200. By type, the board carries 18 capacitors, 12 connectors, 12 diodes, 10 resistors, 6 jumpers and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
Power Amplifier based on Michael Chua's C300 amplifier
This is a PCB layout by Daniel Marks based on Michael Chua's C300 amplifier which can be found at:
This is a project designed to be a good quality amplifier that is achieves good quality distortion (< 0.1% THD at 10 kHz and 300 W per channel max), and is both educational (to study for electronics engineering and hobbyist use) and archival (to be useful long into the future, or "future proofed"). This is a layout from 2020 but it is assumed that decades into the future, relatively few bipolar transistor models will be available as through-hole and discrete component electronics become ever…
Main components on the XLRtoBal
XLRtoBal bill of materials (BOM)
62 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | THAT1200 | DIP-8_W7.62mm_Socket | U1, U2 |
| 1 | TIP41C | TO-220-3_Vertical | Q1 |
| 1 | TIP42C | TO-220-3_Vertical | Q2 |
| 2 | XLR4BODYPIN | IOXLR3FEH | J1, J4 |
| 2 | Conn_01x04 | TerminalBlock_bornier-4_P5.08mm | J2, J5 |
| 1 | Conn_01x04 | TerminalBlock_bornier-4_P5.08mm_with_spade | J3 |
| 4 | Conn_01x01 | 1pin | J6, J7, J8, J9 |
| 2 | SMAPCB | SMA_THT_Jack_Straight | J10, J11 |
| 1 | Conn_01x02 | TerminalBlock_bornier-2_P5.08mm_with_spade | J12 |
| 6 | Jumper_NO_Small | Pin_Header_Straight_1x02_Pitch2.54mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 8 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D7, D8, D9, D10 |
| 2 | 1N4742 | D_DO-41_SOD81_P7.62mm_Horizontal | D5, D6 |
| 2 | LED | LED_D3.0mm | D11, D12 |
| 4 | 470 pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C13, C14 |
| 2 | 100 pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C15 |
| 8 | 100 nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C6, C7, C10, C11, C12, C16, C18 |
| 2 | 220 uF | CP_Radial_D8.0mm_P5.00mm | C5, C17 |
| 2 | 100 uF | CP_Radial_D10.0mm_P5.00mm | C8, C9 |
| 4 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R7, R8 |
| 2 | 6k8 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3, R4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 2 | 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10 |
XLRtoBal design files
The KiCad project lives in the profdc9/PowerAmpAudio repository on GitHub; these links point at the commit this page was built from.
XLRtoBal: common questions
How big is the XLRtoBal PCB?
The XLRtoBal measures 85 × 93 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XLRtoBal?
62 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the XLRtoBal design files?
From the profdc9/PowerAmpAudio repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the XLRtoBal design in my own project?
The repository has no license, so all rights stay with profdc9. Use it as a reference, and ask the author before reusing the design.
More boards in PowerAmpAudio
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687