6 open source boards using the TAS5805MPWPR
Real designs built with the TAS5805MPWPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Nest mini drop in
iMike78
74.5 × 70.6 mm243 parts4LCERN-OHL-S-2.0598STM32
BedCooler
NicholasKorth
131.5 × 132.4 mm249 parts6LCC-BY-NC-4.011ESP32
Nest mini v2-voice
marceldale
74.5 × 70.6 mm231 parts4LCERN-OHL-S-2.01ESP32
Hoerbaer
drachosaurus
76 × 88 mm195 parts4LNo license1Mynd AMP
teufelaudio
90.5 × 57.5 mm158 parts2LCC-BY-SA-4.076Mynd AMP
Prototype-Fund-Hardware
90.5 × 57.5 mm158 parts2LNo license3
How designs wire the TAS5805MPWPR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TAS5805MPWPR connects to, and the resistors, capacitors and other passives placed on it.
- The DVDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 4.7 µF).
- The VR_DIG pin has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 100 nF).
- The AVDD pin has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 4.7 µF).
- The PVDD pins have a capacitor to GND on 6 of 6 designs, most often 22 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 0 | Connected to: GND 100% | — |
| DGNDpin 1, 5 | Connected to: GND 100% | — |
| DVDDpin 2 | Connected to: 3.3V 100% |
|
| ADR/FAULTpin 3 | Connected to: Signal 100% |
|
| VR_DIGpin 4 | Connected to: Signal 100% |
|
| LRCLKpin 6 | Connected to: Signal 100% |
|
| SCLKpin 7 | Connected to: Signal 100% |
|
| SDINpin 8 | Connected to: Signal 100% |
|
| SDOUTpin 9 | Connected to: Not connected 67% · a signal 33% |
|
| SDApin 10 | Connected to: The microcontroller 50%, MPR121QR2 33% |
|
| SCLpin 11 | Connected to: The microcontroller 50%, MPR121QR2 33% |
|
| PDNpin 12 | Connected to: The microcontroller 50% |
|
| AVDDpin 13 | Connected to: Signal 100% |
|
| AGNDpin 14 | Connected to: GND 100% | — |
| PVDDpin 15, 16, 27, 28 | Connected to: Signal 83% · 12V 17% |
|
| OUT_B+pin 17 | Connected to: Signal 100% |
|
| BST_B+pin 18 | Connected to: Signal 100% |
|
| PGNDpin 19, 24 | Connected to: GND 100% | — |
| OUT_B-pin 20 | Connected to: Signal 100% |
|
| BST_B-pin 21 | Connected to: Signal 100% |
|
| BST_A-pin 22 | Connected to: Signal 100% |
|
| OUT_A-pin 23 | Connected to: Signal 100% |
|
| BST_A+pin 25 | Connected to: Signal 100% |
|
| OUT_A+pin 26 | Connected to: Signal 100% |
|
| POWERPAD_29pin 29 | Connected to: GND 100% | — |
| POWERPAD_30pin 30 | Connected to: GND 100% | — |
| POWERPAD_31pin 31 | Connected to: GND 100% | — |
| POWERPAD_32pin 32 | Connected to: GND 100% | — |
| POWERPAD_33pin 33 | Connected to: GND 100% | — |
| POWERPAD_34pin 34 | Connected to: GND 100% | — |
| POWERPAD_35pin 35 | Connected to: GND 100% | — |
| POWERPAD_36pin 36 | Connected to: GND 100% | — |
| POWERPAD_37pin 37 | Connected to: GND 100% | — |
| POWERPAD_38pin 38 | Connected to: GND 100% | — |
| POWERPAD_39pin 39 | Connected to: GND 100% | — |
| POWERPAD_40pin 40 | Connected to: GND 100% | — |
| POWERPAD_41pin 41 | Connected to: GND 100% | — |
| POWERPAD_42pin 42 | Connected to: GND 100% | — |
| POWERPAD_43pin 43 | Connected to: GND 100% | — |
| POWERPAD_44pin 44 | Connected to: GND 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nest mini drop in pcb by iMike78, Mynd AMP by teufelaudio, BedCooler by NicholasKorth and Mynd AMP by Prototype-Fund-Hardware.
The TAS5805MPWPR in open source designs
The gallery holds 6 open source boards using the TAS5805MPWPR from 6 GitHub repositories; a typical one measures about 83.3 × 70.6 mm and carries around 213 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is Nest mini drop in pcb by iMike78.
Parts used alongside the TAS5805MPWPR
What boards using the TAS5805MPWPR are built for
TAS5805MPWPR: common questions
Where can I find a TAS5805MPWPR reference design?
Each of the 6 boards on this page is a real design using the TAS5805MPWPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TAS5805MPWPR DVDD pin?
The DVDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the TAS5805MPWPR.
How is the TAS5805MPWPR VR_DIG pin connected?
The VR_DIG pin has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the TAS5805MPWPR.
How is the TAS5805MPWPR AVDD pin connected?
The AVDD pin has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the TAS5805MPWPR.
What parts are used alongside the TAS5805MPWPR?
The ESP32-S3R8, MPR121QR2, SN74LVC125APWR, TAS5825PRHBR and TLV73333PDBVR appear in the most repositories here.
Which microcontrollers do boards using the TAS5805MPWPR use?
Most are built on ESP32 (3) and STM32 (1).
How big is a typical board using the TAS5805MPWPR?
The median is 83.3 × 70.6 mm, and 33% are two-layer designs.
What is the most popular open source board using the TAS5805MPWPR?
By GitHub stars, Nest mini drop in pcb by iMike78, with 598 stars.
Can I simulate one of these boards using the TAS5805MPWPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.