HardLabs

Mini futbolista

proyectoymontajes·mini_futbolista·HARDWARE/KICAD/mini_futbolista.kicad_pcb

Mini futbolista PCB layout, top view — open source ESP32 board by proyectoymontajes

About the Mini futbolista PCB

Mini futbolista is an open source ESP32 PCB design by proyectoymontajes, published on GitHub. It is a 2-layer board measuring 49.5 × 99.5 mm, with 12 components from 9 distinct parts.

Its main chip is the ESP32-C3_SUPERMINI_TH, from the ESP32 family. By type, the board carries 5 connectors, 4 capacitors and 2 ICs.

It belongs with the robotics & motion designs in this gallery.

From the project

Robot Futbolista ESP32 super mini

Main components on the Mini futbolista

ESP32-C3_SUPERMINI_TH

Mini futbolista bill of materials (BOM)

12 components, 9 distinct parts.

QtyPartRefs
1
ESP32-C3_SUPERMINI_TH
U1
1
~
U2
2
Screw_Terminal_01x02
J1, J2
1
ENTRADA BATERIA
J3
1
LLAVE ENCENDIDO
J4
1
Conn_01x04_Pin
J5
1
PUENTE H
DRV1
2
C_Polarized
C1, C2
2
C
C3, C4

Mini futbolista design files

The KiCad project lives in the proyectoymontajes/mini_futbolista repository on GitHub; these links point at the commit this page was built from.

Mini futbolista: common questions

What microcontroller does the Mini futbolista use?

The Mini futbolista is built around the ESP32-C3_SUPERMINI_TH, from the ESP32 family.

How big is the Mini futbolista PCB?

The Mini futbolista measures 49.5 × 99.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mini futbolista?

12 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mini futbolista design files?

From the proyectoymontajes/mini_futbolista repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mini futbolista design in my own project?

The repository has no license, so all rights stay with proyectoymontajes. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mini futbolista without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards