37 open source boards using the ESP32-C3_SUPERMINI_TH
Real designs built with the ESP32-C3_SUPERMINI_TH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Pixel Dust
hackclub
136.9 × 148.5 mm402 parts2LNo license7ESP32
Bt nes advantage
aaronperkins
78 × 36 mm26 parts2LGPL-3.05ESP32
Can bus
satspares
48 × 42 mm20 parts2LMIT4ESP32
Velocity-Based-Training
m351351
47 × 44 mm18 parts2LNo license2- schematic only · 27 partsESP32
Sata psu
majabojarska
27 partsMIT2 ESP32
UTAC
X-zeed
104 × 60 mm59 parts2LNo license1ESP32
MacoEins
Joe-BN
93.1 × 82.5 mm28 parts2LNo license1ESP32
Probador bobinas cop
ramiroedson72-cloud
61 × 74 mm12 parts2LNo license1ESP32
Chichi
jai-git4208
36 × 48.5 mm7 parts2LMIT1ESP32
AfterBurner
cloudUwU05
32.2 × 26.3 mm3 parts2LNo license1- schematic only · 5 partsESP32
AirQualityBoxy
fablabnk
5 partsNo license1 ESP32
CarCANdy
redt1de
110 × 68 mm71 parts2LNo license0ESP32
Power mon
baldufal
125 × 95 mm64 parts2LMIT0ESP32
GummyPad
CloudsAreCloudy
85 × 99 mm46 parts2LNo license0ESP32
NixieClock
macdems
164 × 60.5 mm42 parts2LCC-BY-SA-4.00ESP32
TankSync tx
gargsrishtii
100 × 100 mm38 parts2LCERN-OHL-P-2.00ESP32
Projet 1DA
johan-954
42 × 35 mm36 parts2LNo license0ESP32
Garage
macdems
90 × 100 mm29 parts2LNo license0ESP32
Throw a-Phone
Chicken-Slayer
50 × 85 mm26 parts2LNo license0ESP32
Self-Balancing-Robot
abdelrauf-44
68.6 × 68.6 mm22 parts2LNo license0ESP32
Arduin o punch
sakhnik
45 × 55 mm19 parts2LGPL-2.00ESP32
Not a block
kryo-77
57.5 × 40 mm15 parts2LNo license0ESP32
AirNode-Room-Sensor
Syren0914
70 × 100 mm15 parts2LCERN-OHL-S-2.00ESP32
Tuxtag hardware
TuxElectronics
25.8 × 37.2 mm13 parts2LCERN-OHL-S-2.00ESP32
Mini futbolista
proyectoymontajes
49.5 × 99.5 mm12 parts2LNo license0ESP32
UVTimer
willy40
58.5 × 32.1 mm10 parts2LMIT0RP2040/RP2350
Irl raver
hackclub
98 × 98 mm292 parts2LNo license7ESP32
Can bus-2026
satspares
48 × 42 mm16 parts2LMIT4ESP32
Starting module v2
ANTzacalie
120 × 65 mm18 parts2LGPL-3.01ESP32
Obdh Bacural
RDAsaBranca
90 × 90 mm14 parts2LNo license1ESP32
Control
Mario-dango
67.7 × 46.8 mm26 parts2LNo license0ESP32
Ledboard
hackclub
100 × 100 mm235 parts2LNo license7ESP32
Pixle LED
hackclub
84.3 × 97.1 mm146 parts2LNo license7ESP32
Pixel
hackclub
95 × 85.8 mm80 parts2LNo license7RP2040/RP2350
Lightbox
hackclub
87.5 × 66.9 mm67 parts2LNo license7ESP32
Jard c3
bpmine
78 × 78 mm33 parts2LNo license0
How designs wire the ESP32-C3_SUPERMINI_TH
Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the ESP32-C3_SUPERMINI_TH connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pin is tied to 3.3V on 15 of 24 designs (not connected on 5, a signal on 4).
- The 5V_5V pin is tied to 5V on 15 of 25 designs (not connected on 4, a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 3.3 | Connected to: 3.3V 63% · not connected 21% · a signal 17% | — |
| 5V_5Vpin 5V | Connected to: 5V 60% · not connected 16% · a signal 24% | — |
| GND_Gpin G | Connected to: GND 92% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Irl raver by hackclub, Bt nes advantage by aaronperkins, Can bus-2026 by satspares and Velocity-Based-Training by m351351.
The ESP32-C3_SUPERMINI_TH in open source designs
The gallery holds 37 open source boards using the ESP32-C3_SUPERMINI_TH from 30 GitHub repositories; a typical one measures about 78 × 68.6 mm and carries around 26 components.
100% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.
The most starred is Pixel Dust by hackclub.
Parts used alongside the ESP32-C3_SUPERMINI_TH
Microcontrollers on boards using the ESP32-C3_SUPERMINI_TH
What boards using the ESP32-C3_SUPERMINI_TH are built for
ESP32-C3_SUPERMINI_TH: common questions
Where can I find a ESP32-C3_SUPERMINI_TH reference design?
Each of the 37 boards on this page is a real design using the ESP32-C3_SUPERMINI_TH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-C3_SUPERMINI_TH 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 15 of 24 designs (not connected on 5, a signal on 4). Counted from the KiCad layouts of 26 open source designs using the ESP32-C3_SUPERMINI_TH.
How is the ESP32-C3_SUPERMINI_TH 5V_5V pin connected?
The 5V_5V pin is tied to 5V on 15 of 25 designs (not connected on 4, a signal on 6). Counted from the KiCad layouts of 26 open source designs using the ESP32-C3_SUPERMINI_TH.
Which microcontrollers do boards using the ESP32-C3_SUPERMINI_TH use?
Most are built on ESP32 (35) and RP2040/RP2350 (2).
How big is a typical board using the ESP32-C3_SUPERMINI_TH?
The median is 78 × 68.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-C3_SUPERMINI_TH?
By GitHub stars, Pixel Dust by hackclub, with 7 stars.
Can I simulate one of these boards using the ESP32-C3_SUPERMINI_TH before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.