Double-Stack
przybysh·Double-Stack
About the Double-Stack PCB
Double-Stack is an open source PCB design by przybysh, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 54.6 × 52.7 mm, with 36 components from 15 distinct parts.
By type, the board carries 14 resistors, 10 capacitors, 4 transistors, 4 diodes and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
Double Stack Distortion Pedal
These are the KiCAD schematics and board layout filed for my Double Stack Distortion pedal. If you just want the Gerber files or a PDF of the schematic check out the releases tab for downloads.
This PCB should be easily manufacturable with most online PCB houses by just uploading the gerber files.
This board is designed to be used with my Switchboard Pedal IO PCB which you can find here.
Double-Stack bill of materials (BOM)
36 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | BC547 | TO-92_Wide | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x06_Male | PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal_Short | J2 |
| 2 | 100k | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2 |
| 4 | 1N4148 | D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D1, D2, D3, D4 |
| 3 | 100n | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C7, C8 |
| 3 | 470n | C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C2, C4, C5 |
| 3 | 1µ | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C3, C6, C10 |
| 1 | 1n | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C9 |
| 4 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R11, R12 |
| 4 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3, R7, R9, R13 |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5, R8 |
| 2 | 39k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R14 |
| 1 | 390k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R10 |
Double-Stack design files
The KiCad project lives in the przybysh/Double-Stack repository on GitHub; these links point at the commit this page was built from.
- LayoutDouble Stack.kicad_pcb
- SchematicDouble Stack.kicad_sch
Double-Stack: common questions
How big is the Double-Stack PCB?
The Double-Stack measures 54.6 × 52.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Double-Stack?
36 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Double-Stack design files?
From the przybysh/Double-Stack repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Double-Stack design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687