Hackclub keypad
pui4·hackclub_keypad·PCB/hc_real_pad.kicad_pcb
About the Hackclub keypad PCB
Hackclub keypad is an open source PCB design by pui4, published on GitHub. It is a 2-layer board measuring 149.9 × 81.3 mm, with 55 components from 7 distinct parts.
Other key parts include the MOUDLE-SEEEDUINO-XIAO and MCP23017_SP. By type, the board carries 34 diodes, 18 switches, 2 ICs and 1 connector.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
a keypad made for hackclub
Case - 3x M3x5mx4mm Heatset Inserts - 3 M3x16mm Screws - Case Parts (the top and bottom parts)

Main components on the Hackclub keypad
Hackclub keypad bill of materials (BOM)
55 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOUDLE-SEEEDUINO-XIAO | XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | MCP23017_SP | DIP-28_W7.62mm | U3 |
| 1 | OLED_DISPLAY | SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 16 | SW_PUSH_45DEG SW_Push_45deg | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 2 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW17, SW18 |
| 18 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +10 |
| 16 | WS2812B | SK6812MINI-E_fixed | D19, D20, D21, D22, D23, D24, D25, D26 +8 |
Hackclub keypad design files
The KiCad project lives in the pui4/hackclub_keypad repository on GitHub; these links point at the commit this page was built from.
Hackclub keypad: common questions
How big is the Hackclub keypad PCB?
The Hackclub keypad measures 149.9 × 81.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hackclub keypad?
55 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hackclub keypad design files?
From the pui4/hackclub_keypad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hackclub keypad design in my own project?
The repository has no license, so all rights stay with pui4. Use it as a reference, and ask the author before reusing the design.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k