DAQ dev board
About the DAQ dev board
DAQ dev board is an open source PCB design by Purdue-Space-Program, published on GitHub. It is a 2-layer board measuring 82 × 42 mm, with 38 components from 17 distinct parts.
Other key parts include the ADS1158IRTCR (ADC), AD8495 (TC AMP) and OP777ARZ (OP AMP). By type, the board carries 14 capacitors, 14 resistors, 4 connectors, 3 ICs, 2 diodes and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Boards and other components for R4
��# PSPLR4Avionics_Hardware
Main components on the DAQ dev board
DAQ dev board bill of materials (BOM)
38 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADS1158IRTCR (ADC) | RTC0048A-IPC_A | U1 |
| 1 | AD8495 (TC AMP) | MSOP-8_3x3mm_P0.65mm | U2 |
| 1 | OP777ARZ (OP AMP) | R_8_ADI | U3 |
| 1 | 32.768kHz | XTAL_ABS25-32.768KHZ-6-1-T | Y1 |
| 1 | Thermocouple | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x16_Pin | PinHeader_1x16_P2.54mm_Vertical | J2 |
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J3, J5 |
| 2 | LED | C_0603_1608Metric | D1, D2 |
| 2 | 4.7pf | C_0603_1608Metric | C1, C2 |
| 1 | 22nf | C_0603_1608Metric | C3 |
| 3 | 1nF | C_0603_1608Metric | C4, C5, C6 |
| 4 | 10uF | C_0603_1608Metric | C7, C10, C12, C13 |
| 4 | 0.1uF | C_0603_1608Metric | C8, C9, C11, C14 |
| 9 | 10k | R_0603_1608Metric | R1, R2, R8, R9, R10, R11, R12, R13 +1 |
| 1 | 1M | R_0603_1608Metric | R3 |
| 2 | 1k | R_0603_1608Metric | R4, R5 |
| 2 | 100 | R_0603_1608Metric | R6, R7 |
DAQ dev board design files
The KiCad project lives in the Purdue-Space-Program/PSPL_R4_Avionics_Hardware repository on GitHub; these links point at the commit this page was built from.
DAQ dev board: common questions
How big is the DAQ dev board?
The DAQ dev board measures 82 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DAQ dev board?
38 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the DAQ dev board design files?
From the Purdue-Space-Program/PSPL_R4_Avionics_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DAQ dev board design in my own project?
The repository has no license, so all rights stay with Purdue-Space-Program. Use it as a reference, and ask the author before reusing the design.
More boards in PSPL_R4_Avionics_Hardware
BMS 1.1
89.5 × 130 mm113 parts2LNo license2
Flight computer
78 × 67 mm102 parts4LNo license2
STM32Stm
71.4 × 46.2 mm69 parts2LNo license2
NXPPower systems
65.5 × 93 mm50 parts4LNo license2
MegaTC dev board
34.3 × 34.3 mm35 parts4LNo license2
Pyro
34.5 × 32.3 mm15 parts2LNo license2
IMU Dev Board
25.5 × 23 mm12 parts2LNo license2
Magnetometer Dev Board
22 × 28 mm5 parts2LNo license2
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979