Timer strike indicator
About the Timer strike indicator PCB
Timer strike indicator is an open source PCB design by PurkkaKoodari, published on GitHub under the MIT license. It is a 2-layer board measuring 40.6 × 15.8 mm, with 21 components from 3 distinct parts.
By type, the board carries 10 diodes, 10 resistors and 1 connector.
From the project
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw
This project is a hardware reimplementation of the game [Keep Talking and Nobody Explodes][ktane]. The game runs fully on the physical device and is controlled using a web interface over Wi-Fi. The project will be documented in this repository – expect the links below to be broken for the near future.
The hardware is built around a Raspberry Pi Zero W, which runs the main controller software, attached to a backplane that provides power, connectivity and audio. The game's modules are built as independent devices, usually based on an Arduino Nano, which connect to the backplane using…
Timer strike indicator bill of materials (BOM)
21 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 10 | LED | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 10 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
Timer strike indicator design files
The KiCad project lives in the PurkkaKoodari/ktane-hw repository on GitHub; these links point at the commit this page was built from.
Timer strike indicator: common questions
How big is the Timer strike indicator PCB?
The Timer strike indicator measures 40.6 × 15.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Timer strike indicator?
21 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Timer strike indicator design files?
From the PurkkaKoodari/ktane-hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Timer strike indicator design in my own project?
Yes, under the terms of its MIT license, which PurkkaKoodari chose for the repository.
More boards in ktane-hw
AVR/ArduinoBackplane
200 × 100 mm96 parts2LMIT2
AVR/ArduinoPassword
100 × 100 mm58 parts2LMIT2
AVR/ArduinoModule base
100 × 100 mm29 parts2LMIT2
AVR/ArduinoSerial number
80 × 36.6 mm26 parts2LMIT2
AVR/ArduinoKeypad
100 × 100 mm26 parts2LMIT2
AVR/ArduinoTimer
100 × 100 mm18 parts2LMIT2