HardLabs

Ha water tank sensor

pvandervelde·ha-water-tank-sensor·schematics/tank-sensor.kicad_pcb

Ha water tank sensor PCB layout, top view — open source ESP32 board by pvandervelde

About the Ha water tank sensor PCB

Ha water tank sensor is an open source ESP32 PCB design by pvandervelde, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 26.8 × 6.4 mm, with 2 components from 2 distinct parts.

Its main chip is the ESP32-C6-DevKitC-1, from the ESP32 family. By type, the board carries 1 IC and 1 diode.

It belongs with the sensors, iot & wireless and power & battery designs in this gallery.

From the project

Stores the code and schematics for the sensor used to monitor the level in the water tanks on our property

Stores the code and schematics for the system we use to monitor the level in the water tanks on our property.

Consists of a IoT device that measures the water level in the tank and sends it to the service using WIFI. The service extracts the data from the message and sends it to a Grafana stack.

ESP32-C6 DevKit Submerged pressure sensor BME280 for temperature and humidity Light sensitive diode - To check that the enclosure is still sealed Solar panel Battery (1.3 Ah) ADS1115 - To read the analog values from the pressure sensor TSR1-2450 - To regulate the voltage from the battery to the…

Main components on the Ha water tank sensor

ESP32-C6-DevKitC-1

Ha water tank sensor bill of materials (BOM)

2 components, 2 distinct parts.

QtyPartRefs
1
ESP32-C6-DevKitC-1
U1
1
1N4007
D3

Ha water tank sensor design files

The KiCad project lives in the pvandervelde/ha-water-tank-sensor repository on GitHub; these links point at the commit this page was built from.

Ha water tank sensor: common questions

What microcontroller does the Ha water tank sensor use?

The Ha water tank sensor is built around the ESP32-C6-DevKitC-1, from the ESP32 family.

How big is the Ha water tank sensor PCB?

The Ha water tank sensor measures 26.8 × 6.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ha water tank sensor?

2 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ha water tank sensor design files?

From the pvandervelde/ha-water-tank-sensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ha water tank sensor design in my own project?

Yes, under the terms of its Apache-2.0 license, which pvandervelde chose for the repository.

Can I test firmware for the Ha water tank sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards