8 open source boards using the ESP32-C6-DevKitC-1
Real designs built with the ESP32-C6-DevKitC-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Nexus.terminal
Ekam-wadhwa1
353 × 117 mm170 parts4LGPL-3.01ESP32
Lawn sprinkler
adriencarbonaro
135 × 101.5 mm87 parts2LNo license0ESP32
PCB Kurs
AGH-AIOTA
167.5 × 83.9 mm33 parts2LNo license0ESP32
Buzz car line follower
iihij
65 × 65 mm12 parts2LNo license0ESP32
Ha water tank sensor
pvandervelde
26.8 × 6.4 mm2 parts2LApache-2.00- schematic only · 29 partsESP32
Halo
humblef00ls
29 partsCustom license0 - schematic only · 26 partsESP32
Giessanlage
YuliRox
26 partsNo license0 ESP32
Carrier
polya2005
110.5 × 77.5 mm9 parts2LMIT0
How designs wire the ESP32-C6-DevKitC-1
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-C6-DevKitC-1 connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pin is tied to 3.3V on 5 of 6 designs.
- The EN/RESET pin is left unconnected on 4 of 6 designs (a signal on 2).
- The GPIO8/BOOT pin is left unconnected on 4 of 6 designs (a signal on 2).
- The 5V pin is tied to 5V on 4 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1 | Connected to: 3.3V 83% · not connected 17% | — |
| EN/RESETpin 2 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO8/BOOTpin 9 | Connected to: Not connected 67% · a signal 33% | — |
| 5Vpin 14 | Connected to: 5V 67% · not connected 17% · a signal 17% | — |
| GNDpin 15, 18, 21, 32 | Connected to: GND 71% · not connected 25% | — |
| NCpin 16, 17 | Connected to: Not connected 100% | — |
| GPIO12/USB_D-pin 19 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO13/USB_D+pin 20 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO9/BOOTpin 22 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO15/JTAGpin 29 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO17/U0RXDpin 30 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO16/U0TXDpin 31 | Connected to: Not connected 67% · a signal 33% | — |
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nexus.terminal by Ekam-wadhwa1, Lawn sprinkler by adriencarbonaro, PCB Kurs by AGH-AIOTA and Buzz car line follower by iihij.
The ESP32-C6-DevKitC-1 in open source designs
The gallery holds 8 open source boards using the ESP32-C6-DevKitC-1 from 8 GitHub repositories; a typical one measures about 122.7 × 80.7 mm and carries around 28 components.
83% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Nexus.terminal by Ekam-wadhwa1.
Microcontrollers on boards using the ESP32-C6-DevKitC-1
What boards using the ESP32-C6-DevKitC-1 are built for
ESP32-C6-DevKitC-1: common questions
Where can I find a ESP32-C6-DevKitC-1 reference design?
Each of the 8 boards on this page is a real design using the ESP32-C6-DevKitC-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-C6-DevKitC-1 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-C6-DevKitC-1.
How is the ESP32-C6-DevKitC-1 EN/RESET pin connected?
The EN/RESET pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the ESP32-C6-DevKitC-1.
How is the ESP32-C6-DevKitC-1 GPIO8/BOOT pin connected?
The GPIO8/BOOT pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the ESP32-C6-DevKitC-1.
Which microcontrollers do boards using the ESP32-C6-DevKitC-1 use?
Most are built on ESP32 (8).
How big is a typical board using the ESP32-C6-DevKitC-1?
The median is 122.7 × 80.7 mm, and 83% are two-layer designs.
What is the most popular open source board using the ESP32-C6-DevKitC-1?
By GitHub stars, Nexus.terminal by Ekam-wadhwa1, with 1 stars.
Can I simulate one of these boards using the ESP32-C6-DevKitC-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.