Projects showcase

QuartzAl·Projects-showcase·Magnetic Levitator/levitator/levitator.kicad_pcb

Projects showcase PCB layout, top view — open source board by QuartzAl

About the Projects showcase PCB

Projects showcase is an open source PCB design by QuartzAl, published on GitHub. It is a 2-layer board measuring 41.3 × 31.2 mm, with 13 components from 11 distinct parts.

Other key parts include the LM358, L7805 and MP1584. By type, the board carries 3 ICs, 3 connectors, 2 capacitors, 2 resistors, 1 transistor and 1 diode.

From the project

A simple magnetic levitator I made with an ON-OFF controller, the system kind of Proportional controller's itself because of the inductive effect of the coil, hence why not need to use an actual proportional controller. The coil had to be wound with care as inalignment of the coi

A simple magnetic levitator I made with an ON-OFF controller, the system kind of Proportional controller's itself because of the inductive effect of the coil, hence why not need to use an actual proportional controller. The coil had to be wound with care as inalignment of the coil would reduce it's magnetic strength, the object to be lifted in this levitator has to also be a magnet in order to give proper feedback to the SS49E sensor. The frame of the magnetic levitator I built from several pieces of cut cardboard and hotglue, enough to hold the coil and circuit.

Main components on the Projects showcase

Projects showcase bill of materials (BOM)

13 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM358
U1
1
L7805
U2
1
MP1584
U4
1
IRLZ44N
Q1
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J1
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J2
1
Screw_Terminal_01x03
J3
1
10K
10k
RV1
1
1N5819
D1
2
100NF
100nf
C1, C2
2
10K
10k
R1, R2

Projects showcase design files

The KiCad project lives in the QuartzAl/Projects-showcase repository on GitHub; these links point at the commit this page was built from.

Projects showcase: common questions

How big is the Projects showcase PCB?

The Projects showcase measures 41.3 × 31.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Projects showcase?

13 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Projects showcase design files?

From the QuartzAl/Projects-showcase repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Projects showcase design in my own project?

The repository has no license, so all rights stay with QuartzAl. Use it as a reference, and ask the author before reusing the design.