I2cpanel.unrouted
QUniBone·Hardware·panel_rl02/i2cpanel.unrouted.kicad_pcb
About the I2cpanel.unrouted PCB
I2cpanel.unrouted is an open source PCB design by QUniBone, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 72 × 144.5 mm, with 296 components from 38 distinct parts.
Other key parts include the 24LC256, MCP23017 and ULN2803A. By type, the board carries 18 connectors, 10 capacitors, 8 resistors, 4 ICs, 3 jumpers and 1 switch.
From the project
Design files to produce UniBone / QBone hardware
Main components on the I2cpanel.unrouted
I2cpanel.unrouted bill of materials (BOM)
296 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 24LC256 ULN2803A | DIP-18_W7.62mm_Socket | U1 |
| 2 | MCP23017 | DIP-28_W7.62mm_Socket | U2, U4 |
| 1 | ULN2803A | DIP-18_W7.62mm_Socket | U3 |
| 1 | A0 RL0-LOAD | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | A1 RL0-RDY | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | A2 RL0-FAULT | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | A3 RL0-WPROT | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | A4 RL1-LOAD | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | A5 RL1-RDY | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | A6 RL1-FAULT | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | A7 RL1-WPROT | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | I2C IN | IDC-Header_2x05_P2.54mm_Vertical | J9 |
| 1 | B0 RL2-LOAD | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | B1 RL2-RDY | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | B2 RL2-FAULT | PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | B3 RL2-WPROT | PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | B4 RL3-LOAD | PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | B5 RL3-RDY | PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | B6 RL3-FAULT | PinHeader_1x04_P2.54mm_Vertical | J16 |
| 1 | B7 RL3-WPROT | PinHeader_1x04_P2.54mm_Vertical | J17 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | I2C OUT | IDC-Header_2x05_P2.54mm_Vertical | J18 |
| 1 | TERM_SDA | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | TERM_SCL | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | TERM_RESET | PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | ADDRSEL | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW1 |
| 252 | — | Lochraster_Square_breit | _190226133706_0, _190226133706_1, _190226133706_2, _190226133706_3, _190226133706_4, _190226133706_5, _190226133706_6, _190226133706_7 +244 |
| 1 | 100uF | C_Radial_D6.3mm_H11.0mm_P2.50mm | C1 |
| 2 | 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C3 |
| 2 | ?pF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C4, C5 |
| 1 | 1UF ?nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 2 | 1UF 470uF | C_Radial_D10.0mm_H20.0mm_P5.00mm | C7, C10 |
| 1 | 100NF 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C8 |
| 1 | 1UF 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C9 |
| 1 | 10K 2K-10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 2K-10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 3 | 22K 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5 |
| 1 | L or R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 2 | 470 L or R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8 |
I2cpanel.unrouted design files
The KiCad project lives in the QUniBone/Hardware repository on GitHub; these links point at the commit this page was built from.
I2cpanel.unrouted: common questions
How big is the I2cpanel.unrouted PCB?
The I2cpanel.unrouted measures 72 × 144.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I2cpanel.unrouted?
296 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the I2cpanel.unrouted design files?
From the QUniBone/Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the I2cpanel.unrouted design in my own project?
Yes, under the terms of its BSD-2-Clause license, which QUniBone chose for the repository.