Unibone.unrouted
QUniBone·Hardware·unibone/unibone.unrouted.kicad_pcb
About the Unibone.unrouted PCB
Unibone.unrouted is an open source PCB design by QUniBone, published on GitHub under the BSD-2-Clause license. It is a 4-layer board measuring 265.6 × 214.1 mm, with 1309 components from 82 distinct parts.
Other key parts include the 74AHC138, 24LC256, 74LVTH541_PWR, 74HC377 and 74LS244_5V. By type, the board carries 69 resistors, 52 ICs, 45 connectors, 44 capacitors, 7 diodes and 3 switches.
From the project
Design files to produce UniBone / QBone hardware
Main components on the Unibone.unrouted
Unibone.unrouted bill of materials (BOM)
1309 components, 82 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74AHC138 | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | 24LC256 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 8 | 74LVTH541_PWR | SOIC-20W_7.5x12.8mm_P1.27mm | U4, U9, U13, U17, U21, U25, U29, U33 |
| 8 | 74HC377 | SOIC-20W_7.5x12.8mm_P1.27mm | U5, U10, U14, U18, U22, U26, U30, U34 |
| 1 | 74LS244_5V | DIP-20_W7.62mm | U6 |
| 16 | DS8641-LR | DIP-16_W7.62mm | U7, U8, U11, U12, U15, U16, U19, U20 +8 |
| 1 | MAX232 | DIP-16_W7.62mm | U37 |
| 16 | AM26S10 | DIP-16_W7.62mm | U107, U108, U111, U112, U115, U116, U119, U120 +8 |
| 2 | MMBT3904 | SOT-23 | Q1, Q2 |
| 1 | BBB-P8 | PinHeader_2x23_P2.54mm_Vertical | J1 |
| 1 | BBB-P9 | PinHeader_2x23_P2.54mm_Vertical | J2 |
| 2 | +5V UB | PinHeader_1x02_P2.54mm_Vertical | J3, J35 |
| 2 | +3.3V | PinHeader_1x02_P2.54mm_Vertical | J4, J34 |
| 2 | GND | PinHeader_1x04_P2.54mm_Vertical | J5, J36 |
| 1 | LTC_OUT | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Panel | IDC-Header_2x05_P2.54mm_Horizontal | J7 |
| 1 | REG_DATA_FROM_PRU0 | PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | GPIO1_16-19 | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 2 | GND | PinHeader_1x03_P2.54mm_Vertical | J13, J14 |
| 1 | PRU_CONTROL | PinHeader_1x08_P2.54mm_Vertical | J15 |
Show 62 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN-DEC-QUAD-CDEF | dec-conn-quad-ht-pins-only_CDEF | J16 |
| 1 | REG_DATA_TO_PRU1 | PinHeader_1x08_P2.54mm_Vertical | J17 |
| 1 | UB_DATA | PinHeader_1x16_P2.54mm_Vertical | J19 |
| 1 | UB_INTR_PAB | PinHeader_1x03_P2.54mm_Vertical | J20 |
| 1 | UB_ADDR | PinHeader_1x18_P2.54mm_Vertical | J21 |
| 1 | UB_C01 | PinHeader_1x02_P2.54mm_Vertical | J22 |
| 3 | GND | PinHeader_1x08_P2.54mm_Vertical | J23, J56, J57 |
| 1 | UB_MSYN | PinHeader_1x02_P2.54mm_Vertical | J24 |
| 1 | UB_SKBY | PinHeader_1x02_P2.54mm_Vertical | J25 |
| 1 | UB_MISC | PinHeader_1x04_P2.54mm_Vertical | J26 |
| 1 | UART1_RS232_Schneid-Klemm_2x5 | IDC-Header_2x05_P2.54mm_Horizontal | J27 |
| 1 | UB_BRG4 | PinHeader_1x03_P2.54mm_Vertical | J28 |
| 1 | UB_BRG5 | PinHeader_1x03_P2.54mm_Vertical | J29 |
| 1 | UB_BRG6 | PinHeader_1x03_P2.54mm_Vertical | J30 |
| 1 | UB_BRG7 | PinHeader_1x03_P2.54mm_Vertical | J31 |
| 1 | UB_NPRG | PinHeader_1x03_P2.54mm_Vertical | J32 |
| 1 | UART2_RS232_Schneid-Klemm_2x5 | IDC-Header_2x05_P2.54mm_Horizontal | J33 |
| 1 | GPIO2_1-5 | PinHeader_1x05_P2.54mm_Vertical | J37 |
| 1 | - | PinHeader_1x03_P2.54mm_Vertical | J38 |
| 1 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J40 |
| 4 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J41, J42, J61, J62 |
| 1 | Panel_I2C | IDC-Header_2x07_P2.54mm_Horizontal | J43 |
| 1 | LTC_IN | PinHeader_1x02_P2.54mm_Vertical | J46 |
| 1 | I2C2 | PinHeader_1x02_P2.54mm_Vertical | J59 |
| 1 | Reichelt AKL 059-6 | TerminalBlock_Phoenix_PT-1,5-6-3.5-H_1x06_P3.50mm_Horizontal | J60 |
| 4 | NPTH | HOLE-3MM | H1, H2, H7, H8 |
| 1 | A0 | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | A1 | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | HFD3 | HFD3-relay | K1 |
| 1 | SW0-3 | SW_DIP_SPSTx04_Piano_CTS_Series194-4MSTN_W7.62mm_P2.54mm | SW1 |
| 2 | BTN | SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW2, SW3 |
| 1080 | — | Lochraster_Square_breit | _191105121140_0, _191105121140_1, _191105121140_2, _191105121140_3, _191105121140_4, _191105121140_5, _191105121140_6, _191105121140_7 +1072 |
| 1 | PWR | LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D1 |
| 1 | LED0 | LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D2 |
| 1 | LED1 | LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D3 |
| 1 | LED2 | LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D4 |
| 1 | LED3 | LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D5 |
| 1 | ONBUS | LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D6 |
| 1 | 1N4148WS | D_SOD-323 | D7 |
| 35 | 100NF 100nF | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 +27 |
| 4 | 6.3uF | CP_Axial_L11.0mm_D6.0mm_P18.00mm_Horizontal | C36, C37, C38, C39 |
| 4 | 1UF 1uF | C_0805_2012Metric | C40, C41, C42, C43 |
| 1 | 470uF | CP_Axial_L18.0mm_D8.0mm_P25.00mm_Horizontal | C44 |
| 15 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5, R8, R9, R14, R17, R25 +7 |
| 6 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R33, R34, R35, R37, R39 |
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 2 | none | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 5 | 22K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13, R16 |
| 1 | 4K7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 3 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R20 |
| 2 | 2K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R22 |
| 2 | 3K3 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24 |
| 2 | opt. | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R36, R38 |
| 8 | 15 | R_0805_2012Metric | R40, R41, R42, R43, R44, R45, R46, R47 |
| 4 | 0 | R_0805_2012Metric | R48, R49, R50, R51 |
| 8 | 10 | R_0805_2012Metric | R52, R53, R54, R55, R56, R57, R58, R59 |
| 2 | 180 | R_Array_SIP6 | RN3, RN12 |
| 2 | n.a. | R_Array_SIP9 | RN4, RN5 |
| 2 | 10 | R_Array_SIP8 | RN6, RN7 |
| 2 | 15 | R_Array_SIP8 | RN8, RN9 |
| 1 | 0 | R_Array_SIP8 | RN10 |
| 1 | 390 | R_Array_SIP6 | RN11 |
Unibone.unrouted design files
The KiCad project lives in the QUniBone/Hardware repository on GitHub; these links point at the commit this page was built from.
Unibone.unrouted: common questions
How big is the Unibone.unrouted PCB?
The Unibone.unrouted measures 265.6 × 214.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Unibone.unrouted?
1309 components, from 82 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Unibone.unrouted design files?
From the QUniBone/Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Unibone.unrouted design in my own project?
Yes, under the terms of its BSD-2-Clause license, which QUniBone chose for the repository.