Unibone
QUniBone·Hardware·unibone/unibone.kicad_pcb
About the Unibone PCB
Unibone is an open source PCB design by QUniBone, published on GitHub under the BSD-2-Clause license. It is a 4-layer board measuring 265.6 × 214.1 mm, with 115 components from 19 distinct parts.
Other key parts include the 74AHC138, 24LC256, 74LVTH541_PWR and 74HC377. By type, the board carries 55 resistors, 39 capacitors, 18 ICs, 2 transistors and 1 diode.
From the project
Design files to produce UniBone / QBone hardware
Main components on the Unibone
Unibone bill of materials (BOM)
115 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74AHC138 | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | 24LC256 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 8 | 74LVTH541_PWR | SOIC-20W_7.5x12.8mm_P1.27mm | U4, U9, U13, U17, U21, U25, U29, U33 |
| 8 | 74HC377 | SOIC-20W_7.5x12.8mm_P1.27mm | U5, U10, U14, U18, U22, U26, U30, U34 |
| 2 | MMBT3904 | SOT-23 | Q1, Q2 |
| 1 | 1N4148WS | D_SOD-323 | D7 |
| 35 | 100NF 100nF | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 +27 |
| 4 | 1UF 1uF | C_0805_2012Metric | C40, C41, C42, C43 |
| 15 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5, R8, R9, R14, R17, R25 +7 |
| 6 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R33, R34, R35, R37, R39 |
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 5 | 22K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13, R16 |
| 1 | 4K7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 3 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R20 |
| 2 | 2K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R22 |
| 2 | 3K3 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24 |
| 8 | 15 | R_0805_2012Metric | R40, R41, R42, R43, R44, R45, R46, R47 |
| 4 | 0 | R_0805_2012Metric | R48, R49, R50, R51 |
| 8 | 10 | R_0805_2012Metric | R52, R53, R54, R55, R56, R57, R58, R59 |
Unibone design files
The KiCad project lives in the QUniBone/Hardware repository on GitHub; these links point at the commit this page was built from.
Unibone: common questions
How big is the Unibone PCB?
The Unibone measures 265.6 × 214.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Unibone?
115 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Unibone design files?
From the QUniBone/Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Unibone design in my own project?
Yes, under the terms of its BSD-2-Clause license, which QUniBone chose for the repository.