19 open source boards using the 74HC377

Real designs built with the 74HC377, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the 74HC377

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74HC377 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF.
GNDpin 10Connected to: GND 100%
CPpin 11Connected to: 74HC377 75%, 74HC74 25%, a connector 25%
  • Series resistor on 38% · 0 Ω (3), 470 Ω (1)
VCCpin 20Connected to: 5V 100%
  • Decoupling capacitor on 63% · 100 nF (5)

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimal-64x4-Home-Computer by slu4coder, Minimal-UART-Computer-3 by slu4coder, 74HCT6526 Board 0 by dmolinagarcia and CPU2908C by m-okada.

The 74HC377 in open source designs

The gallery holds 19 open source boards using the 74HC377 from 9 GitHub repositories; a typical one measures about 184.5 × 120 mm and carries around 89 components.

50% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.

The most starred is Minimal-64x4-Home-Computer by slu4coder.

Microcontrollers on boards using the 74HC377

What boards using the 74HC377 are built for

74HC377: common questions

Where can I find a 74HC377 reference design?

Each of the 19 boards on this page is a real design using the 74HC377. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC377 VCC pin?

The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the 74HC377.

What parts are used alongside the 74HC377?

The 74HC157, 74HC00, 74HC161, 74HC283 and 74HC32 appear in the most repositories here.

Which microcontrollers do boards using the 74HC377 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 74HC377?

The median is 184.5 × 120 mm, and 50% are two-layer designs.

What is the most popular open source board using the 74HC377?

By GitHub stars, Minimal-64x4-Home-Computer by slu4coder, with 323 stars.

Can I simulate one of these boards using the 74HC377 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part