Rpihw
quorten·rpihw
About the Rpihw PCB
Rpihw is an open source PCB design by quorten, published on GitHub under the Unlicense license. It is a 4-layer board measuring 207 × 78.7 mm, with 97 components from 34 distinct parts.
Other key parts include the SN74HC595N, SN74HC161N, SN74HC08N, SN74HC04N and CD74HC238E. By type, the board carries 32 resistors, 18 capacitors, 11 diodes, 9 ICs, 8 transistors and 7 switches.
From the project
Raspberry Pi SPI devices board design
rpihw -- My First Raspberry Pi Hardware Project =================================================
This is my first large-scale Raspberry Pi hardware project. The original overly large goals of my Raspberry Pi hardware project was to have one Raspberry Pi hardware device with all imaginable peripheral interfaces I could ever conceivably need, so I could just plug in what I need for a particular session. But, since that's too large sweeping of a goal to achieve... let's simply state what my actual design does.
Main components on the Rpihw
Rpihw bill of materials (BOM)
97 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN74HC595N | N16 | U1, U7 |
| 1 | SN74HC161N | N16 | U2 |
| 2 | SN74HC08N | N14 | U3, U9 |
| 1 | SN74HC04N | N14 | U4 |
| 1 | CD74HC238E | N0016A | U5 |
| 1 | SN74HC165N | N16 | U6 |
| 1 | SN74HC32N | N14 | U8 |
| 8 | 2N3904BU | TO-92-3 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 4 | CONN_01X02 | Pin_Header_Straight_1x02 | P1, P2, P101, P102 |
| 1 | CONN_02X20 | Pin_Header_Straight_2x20 | P3 |
| 1 | CONN_01X08 | Connector_Molex_PicoBlade_53047-0810 | P103 |
| 2 | LDQ-N516RI | Cx56-12 | AFF1, AFF2 |
| 2 | L293D | PowerDIP-16 | CR1, CR2 |
| 1 | 16V 2A | C_Radial_D5_L11_P2.5 | F1 |
| 1 | 60V 1.1A | C_Radial_D5_L11_P2.5 | F2 |
| 1 | DPST 6A | Hack_S201 | SW1 |
| 1 | DPST 4A | Hack_L201 | SW101 |
| 1 | SPDT 200mA | SW_Micro_SPST | SW102 |
| 4 | SW_PUSH | SW_PUSH-12mm | SW103, SW104, SW105, SW106 |
| 1 | 5V 9.2V | Diode_DO-35_SOD27_Horizontal_RM10 | D1 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 33V 53.3V | Diode_R-6_Horizontal_Unpol_RM15 | D2 |
| 6 | 5A | Diode_DO-201AD_Horizontal_RM15 | D3, D4, D101, D102, D103, D104 |
| 2 | LED RED | LED-5MM | D105, D107 |
| 1 | LED YELW | LED-5MM | D106 |
| 11 | 100nF | C_Rect_L4_W2.5_P2.5 | C1, C2, C3, C4, C5, C6, C7, C8 +3 |
| 2 | 220uF | C_Radial_D8_L11.5_P3.5 | C12, C13 |
| 3 | 100uF | C_Radial_D5_L11_P2.5 | C14, C101, C102 |
| 1 | 10uF | C_Radial_D5_L11_P2.5 | C103 |
| 1 | 1uF | C_Radial_D5_L11_P2.5 | C104 |
| 11 | 220 | STA_RNMF14 | R1, R2, R3, R4, R5, R6, R7, R8 +3 |
| 8 | 4.7K | STA_RNMF14 | R9, R10, R11, R12, R13, R14, R15, R16 |
| 9 | 51K | STA_RNMF14 | R17, R18, R19, R20, R21, R22, R23, R24 +1 |
| 3 | 10K | STA_RNMF14_STP | R103, R104, R105 |
| 1 | 1K | STA_RNMF14_STP | R106 |
Rpihw design files
The KiCad project lives in the quorten/rpihw repository on GitHub; these links point at the commit this page was built from.
- Layoutrpihw.kicad_pcb
Rpihw: common questions
How big is the Rpihw PCB?
The Rpihw measures 207 × 78.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Rpihw?
97 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rpihw design files?
From the quorten/rpihw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Rpihw design in my own project?
Yes, under the terms of its Unlicense license, which quorten chose for the repository.