6 open source boards using the SN74HC165N
Real designs built with the SN74HC165N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sensors+LEDs
aaronluebbert
57.1 × 456.8 mm41 parts2LNo license1Rpihw
quorten
207 × 78.7 mm97 parts4LUnlicense0DIY-Flipper-Repo
techzt13
125 × 135 mm28 parts2LNo license0RP2040/RP2350
Z80-Diversion
adamgreen
83.8 × 74.4 mm26 parts2LApache-2.00- schematic only · 52 partsTI MSP430/CC
MSP430handheld hardware
aradanmn
52 partsNo license0 Tube detection
kylenmorris
98.8 × 33 mm12 parts2LNo license0
How designs wire the SN74HC165N
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74HC165N connects to, and the resistors, capacitors and other passives placed on it.
- The *QH_7 pin is left unconnected on 4 of 5 designs.
- The CLKINH_15 pin is tied to GND on 4 of 5 designs.
- The SER pin is tied to GND on 3 of 5 designs (a signal on 2).
- The E pin has a resistor to GND on 2 of 5 designs, most often 51 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Epin 3 | Connected to: Signal 100% |
|
| Fpin 4 | Connected to: Signal 80% · GND 20% |
|
| Gpin 5 | Connected to: Signal 80% · GND 20% |
|
| Hpin 6 | Connected to: Signal 80% · GND 20% |
|
| *QH_7pin 7 | Connected to: Not connected 80% · a signal 20% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| SERpin 10 | Connected to: GND 60% · a signal 40% |
|
| Cpin 13 | Connected to: Signal 100% |
|
| Dpin 14 | Connected to: Signal 100% |
|
| CLKINH_15pin 15 | Connected to: GND 80% · a signal 20% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sensors+LEDs by aaronluebbert, Z80-Diversion by adamgreen, Tube detection pcb by kylenmorris and Rpihw by quorten.
The SN74HC165N in open source designs
The gallery holds 6 open source boards using the SN74HC165N from 6 GitHub repositories; a typical one measures about 98.8 × 78.7 mm and carries around 35 components.
80% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Sensors+LEDs by aaronluebbert.
Microcontrollers on boards using the SN74HC165N
What boards using the SN74HC165N are built for
SN74HC165N: common questions
Where can I find a SN74HC165N reference design?
Each of the 6 boards on this page is a real design using the SN74HC165N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74HC165N *QH_7 pin connected?
The *QH_7 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74HC165N.
How is the SN74HC165N CLKINH_15 pin connected?
The CLKINH_15 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74HC165N.
How is the SN74HC165N SER pin connected?
The SER pin is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the SN74HC165N.
Which microcontrollers do boards using the SN74HC165N use?
Most are built on RP2040/RP2350 (1) and TI MSP430/CC (1).
How big is a typical board using the SN74HC165N?
The median is 98.8 × 78.7 mm, and 80% are two-layer designs.
What is the most popular open source board using the SN74HC165N?
By GitHub stars, Sensors+LEDs by aaronluebbert, with 1 stars.
Can I simulate one of these boards using the SN74HC165N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.