HardLabs

Vehicle hardware

race-against-ai·vehicle_hardware

Vehicle hardware PCB layout, top view — open source RP2040/RP2350 board by race-against-ai

About the Vehicle hardware PCB

Vehicle hardware is an open source RP2040/RP2350 PCB design by race-against-ai, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 60 × 140 mm, with 1 components from 1 distinct parts.

Its main chip is the RaspberryPi-Pico, from the RP2040/RP2350 family.

Main components on the Vehicle hardware

RaspberryPi-Pico

Vehicle hardware bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi-Pico
A1

Vehicle hardware design files

The KiCad project lives in the race-against-ai/vehicle_hardware repository on GitHub; these links point at the commit this page was built from.

Vehicle hardware: common questions

What microcontroller does the Vehicle hardware use?

The Vehicle hardware is built around the RaspberryPi-Pico, from the RP2040/RP2350 family.

How big is the Vehicle hardware PCB?

The Vehicle hardware measures 60 × 140 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vehicle hardware?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Vehicle hardware design files?

From the race-against-ai/vehicle_hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Vehicle hardware design in my own project?

Yes, under the terms of its GPL-3.0 license, which race-against-ai chose for the repository.

Can I test firmware for the Vehicle hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards