CombinedKS61Prototype
About the CombinedKS61Prototype PCB
CombinedKS61Prototype is an open source PCB design by radionerd, published on GitHub. It is a 2-layer board measuring 93.5 × 100 mm, with 111 components from 23 distinct parts.
Other key parts include the 74HC164. By type, the board carries 6 connectors, 6 switches, 6 diodes, 6 resistors, 1 IC and 1 capacitor.
It belongs with the audio designs in this gallery.
From the project
Virtual Pipe Organ Schematics, PCBs, MidiFirmware, Console Drawings, Expression Pedal Drawings
Main components on the CombinedKS61Prototype
CombinedKS61Prototype bill of materials (BOM)
111 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC164 | DIP-14_W7.62mm_LongPads | U1 |
| 1 | Conn_01x13_Male | PinHeader_1x13_P2.00mm_Vertical | CN13 |
| 1 | Conn_01x12_Male | PinHeader_1x12_P2.00mm_Vertical | CN14 |
| 2 | Conn_01x20_Female | PinHeader_1x20_P2.54mm_Vertical | J3, J4 |
| 1 | Conn_01x01_Male | PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | LAMP | PinHeader_2x03_P2.54mm_Vertical | J6 |
| 6 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | Buttons1, JB1, JB2, JB3, JB4, SEG7 |
| 2 | Conn_01x12_Male | PinHeader_1x12_P2.54mm_Vertical | GPIO13, GPIO14 |
| 3 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | I2C1, I2C2, I2C3 |
| 1 | IN | PinHeader_1x05_P2.54mm_Vertical | IN1 |
| 1 | Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | Ja3 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | LCD1 |
| 1 | OUT | PinHeader_1x05_P2.54mm_Vertical | OUT1 |
| 2 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | POT1, ToDebugx2 |
| 63 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RD1, RD2, RD3, RD4, RD5, RD6, RD7, RD8 +55 |
| 1 | 3K3 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RD32 |
| 2 | 4k7* | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RU18, RU19 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | Ra1 |
| 1 | SolderJumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | STM32 |
| 6 | SW_TACT_LED | TS12_TS27 | SW1, SW2, SW3, SW6, SW7, SW8 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1N4148 | D_SOD-123 | D1, D2, D3, D6, D7, D8 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 6 | 560 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R6, R7, R8 |
CombinedKS61Prototype design files
The KiCad project lives in the radionerd/VirtualPipeOrgan repository on GitHub; these links point at the commit this page was built from.
CombinedKS61Prototype: common questions
How big is the CombinedKS61Prototype PCB?
The CombinedKS61Prototype measures 93.5 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CombinedKS61Prototype?
111 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the CombinedKS61Prototype design files?
From the radionerd/VirtualPipeOrgan repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CombinedKS61Prototype design in my own project?
The repository has no license, so all rights stay with radionerd. Use it as a reference, and ask the author before reusing the design.
More boards in VirtualPipeOrgan
MidiInterface
223.5 × 19.1 mm223 parts2LNo license0
MidiInterfacePedalBoard
71.1 × 50.8 mm80 parts2LNo license0
MidiInterfaceKS61
68.6 × 45.7 mm80 parts2LNo license0
WiredButtonDriver
78.7 × 22.9 mm29 parts2LNo license0
ButtonMountingBoard
223.5 × 18.4 mm27 parts2LNo license0
ButtonMountingBoard2x3Way
223.5 × 18.4 mm22 parts2LNo license0
PCMountButtonDriver
55.9 × 21.5 mm6 parts2LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687