34 open source boards using the 74HC164
Real designs built with the 74HC164, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
8-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184Yddraig
ddraig68k
340 × 210 mm214 parts4LMIT298 16 computer 2
halfburnttoast
208 × 110 mm111 parts2LNo license21KVL
yamamo2shun1
279.5 × 95 mm245 parts2LMIT16AVR/Arduino
Nixiedisp
jtsiomb
140 × 76.1 mm224 parts2LGPL-3.03STM32
MainBoard
hughe349
120 × 135 mm139 parts4LGPL-3.02AVR/Arduino
Automata Generator Standard
Sirawit7205
246.4 × 127 mm121 parts2LNo license2BeanBoardSPI
PainfulDiodes
199.4 × 80 mm42 parts4LMIT2Spectrum analyzer
thaumatichthys
200 × 100 mm316 parts6LNo license0MidiInterface
radionerd
223.5 × 19.1 mm223 parts2LNo license0Dac circ
b3dag
193 × 160 mm149 parts2LNo license0STM32
Akkupack ng
eurovibes
110 × 80 mm139 parts4LNo license0RISC-V
Iw18ch32v003
frytkisasmaczne
100 × 70 mm120 parts2LNo license0Minimal-UART-Computer
slowcorners
191.8 × 121.3 mm109 parts2LNo license0As11-comp
AvalonSemiconductors
98.6 × 99.4 mm109 parts4LApache-2.00Minimal-UART-CPU-Dev
slowcorners
180.3 × 112.4 mm89 parts2LNo license0Minimal-UART-CPU-FLASH-Edition
tlhconsulting
177.2 × 114.3 mm81 parts2LNo license0PIC
RE3RT4Prog
afiglee
130 × 100 mm68 parts2LNo license0AVR/Arduino
Módulo Aprendizaje Microcontroladores AVR
ieee-cas-unmsm
104.5 × 103.5 mm65 parts2LNo license0Midi controller pot board teensy
mppowell
287 × 135 mm62 parts2LNo license0STM32
Acid vaporizer
vad32m
98 × 50 mm55 parts2LNo license0SPIEX01
mlab-modules
50.3 × 50.3 mm16 parts2LGPL-3.00KVL STK
yamamo2shun1
222.4 × 77.5 mm227 parts4LMIT16AVR/Arduino
Automata Generator Minimal
Sirawit7205
128.3 × 71.8 mm103 parts2LNo license2Interface01
tsunozemichan
75.5 × 91.8 mm31 parts2LNo license1CombinedKS61Prototype
radionerd
93.5 × 100 mm111 parts2LNo license0A-10C-CautionPanelNonMega
IzeHouze
129.5 × 85.1 mm31 parts2LGPL-3.03Exorset Floppy
roberto314
160 × 100 mm85 parts2LNo license1Proto04 fix 02
tsunozemichan
75.5 × 91.8 mm31 parts2LNo license1AVR/Arduino
LogicAnalizer
John-Lluch
148 × 70 mm98 parts4LNo license10- schematic only · 65 parts
Mc14500
89Mods
65 parts2LMIT3 WiredButtonDriver
radionerd
78.7 × 22.9 mm29 parts2LNo license0Spi
scefrom
135.9 × 53.3 mm45 parts2LCustom license2PCMountButtonDriver
radionerd
55.9 × 21.5 mm6 parts2LNo license0
How designs wire the 74HC164
Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the 74HC164 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 12 of 27 designs, most often 100 nF (then 22 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 96% | — |
| VCCpin 14 | Connected to: 5V 96% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8-Bit CPU 32k by slu4coder, Yddraig by ddraig68k, 8 16 computer 2 by halfburnttoast and KVL by yamamo2shun1.
The 74HC164 in open source designs
The gallery holds 34 open source boards using the 74HC164 from 28 GitHub repositories; a typical one measures about 140 × 95 mm and carries around 100 components.
76% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is 8-Bit CPU 32k by slu4coder.
Parts used alongside the 74HC164
Microcontrollers on boards using the 74HC164
What boards using the 74HC164 are built for
74HC164: common questions
Where can I find a 74HC164 reference design?
Each of the 34 boards on this page is a real design using the 74HC164. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC164 VCC pin?
The VCC pin has a decoupling capacitor on 12 of 27 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 27 open source designs using the 74HC164.
What parts are used alongside the 74HC164?
The 74HC165, 74HC04, 74HC00, 74HC02 and 74HC161 appear in the most repositories here.
Which microcontrollers do boards using the 74HC164 use?
Most are built on AVR/Arduino (5), STM32 (3), PIC (1) and RISC-V (1).
How big is a typical board using the 74HC164?
The median is 140 × 95 mm, and 76% are two-layer designs.
What is the most popular open source board using the 74HC164?
By GitHub stars, 8-Bit CPU 32k by slu4coder, with 184 stars.
Can I simulate one of these boards using the 74HC164 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.