Lowstepper hardware
rafkhan·lowstepper·lowstepper_hardware/lowstepper_hardware.kicad_pcb
About the Lowstepper hardware PCB
Lowstepper hardware is an open source NXP PCB design by rafkhan, published on GitHub. It is a 4-layer board measuring 39.4 × 89.7 mm, with 73 components from 47 distinct parts.
Its main chip is the 74HC4051, from the NXP family. Other key parts include the RAF_DAISY_SEED_V1, TL072 and MCP6004. By type, the board carries 34 resistors, 16 connectors, 8 capacitors, 5 ICs, 3 transistors and 2 diodes.
It belongs with the audio designs in this gallery.
From the project
Dual phase manipulation low frequency oscillator by Okay Synthesizer.
Main components on the Lowstepper hardware
Lowstepper hardware bill of materials (BOM)
73 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RAF_DAISY_SEED_V1 TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TL072 MCP6004 | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | 74HC4051 Teensy3.5 | Teensy35_36 | U3 |
| 1 | 74HC4051 LM4040DBZ-10 | SOT-23 | U4 |
| 1 | MCP6004 MCP6002-xSN | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 2 | MMBT3904 | SOT-23 | Q2, Q3 |
| 1 | CONN_02X05_ODD_EVEN PJ398SM-12 | THONK_PJ398SM-12 | J1 |
| 8 | PJ398SM-12 | THONK_PJ398SM-12 | J2, J3, J4, J5, J7, J12, J13, J14 |
| 2 | CONN_01X18_MALE PJ398SM-12 | THONK_PJ398SM-12 | J6, J9 |
| 1 | PJ398SM-12 Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | J8 |
| 2 | PJ398SM-12 Conn_01x16_Female | PinHeader_1x16_P2.54mm_Vertical | J10, J11 |
| 2 | PJ398SM-12 Conn_01x16_Male | PinSocket_1x16_P2.54mm_Vertical | J15, J16 |
| 4 | 10K | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2, RV3, RV4 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 2 | XZM2CRKM2DGFBB45SCCB | LED_D5.0mm-4_RGB | D1, D2 |
| 1 | 47U 47u | C_Elec_3x5.4 | C1 |
| 1 | 47U 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 10U 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 100N 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47u | C_Elec_3x5.4 | C5 |
| 1 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 2 | 3.3K 3.3k | R_0402_1005Metric | R1, R21 |
| 1 | 3.3K 1k | R_0402_1005Metric | R2 |
| 1 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 2 | 10K 100k | R_0402_1005Metric | R4, R6 |
| 1 | 200k | R_0402_1005Metric | R5 |
| 1 | 3.3K 10K | R_0402_1005Metric | R7 |
| 1 | 33k | R_0402_1005Metric | R8 |
| 2 | 3.3K 200k | R_0402_1005Metric | R9, R12 |
| 2 | 100K 100k | R_0402_1005Metric | R10, R13 |
| 2 | 10K 33k | R_0402_1005Metric | R11, R14 |
| 1 | 3.3k | R_0402_1005Metric | R15 |
| 2 | 470 | R_0402_1005Metric | R16, R49 |
| 2 | 1k | R_0402_1005Metric | R17, R48 |
| 1 | 3.3K 470 | R_0402_1005Metric | R18 |
| 1 | 100K 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | 10K 10k | R_0402_1005Metric | R20 |
| 1 | 100K 3.3k | R_0402_1005Metric | R22 |
| 1 | 10K 200k | R_0402_1005Metric | R23 |
| 3 | 200K 100K | R_0402_1005Metric | R24, R33, R36 |
| 1 | 100K 33k | R_0402_1005Metric | R25 |
| 2 | 33K 3.3k | R_0402_1005Metric | R32, R35 |
| 2 | 100K 10K | R_0402_1005Metric | R34, R37 |
| 1 | 33K 470 | R_0402_1005Metric | R47 |
Lowstepper hardware design files
The KiCad project lives in the rafkhan/lowstepper repository on GitHub; these links point at the commit this page was built from.
Lowstepper hardware: common questions
What microcontroller does the Lowstepper hardware use?
The Lowstepper hardware is built around the 74HC4051, from the NXP family.
How big is the Lowstepper hardware PCB?
The Lowstepper hardware measures 39.4 × 89.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Lowstepper hardware?
73 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lowstepper hardware design files?
From the rafkhan/lowstepper repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lowstepper hardware design in my own project?
The repository has no license, so all rights stay with rafkhan. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lowstepper hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in lowstepper
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532