SPT Altimeter
rah1236·SPT_Altimeter
About the SPT Altimeter PCB
SPT Altimeter is an open source STM32 PCB design by rah1236, published on GitHub. It is a 4-layer board measuring 45 × 59 mm, with 57 components from 26 distinct parts.
Its main chip is the STM32F103T8UX, from the STM32 family. Other key parts include the BMP280, SAM-M8Q, RFM95W-915S2, TPS560430X3FDBVR and CP2102N-AXX-XQFN20. By type, the board carries 19 capacitors, 19 resistors, 6 ICs, 5 connectors, 3 diodes and 2 transistors.
Main components on the SPT Altimeter
SPT Altimeter bill of materials (BOM)
57 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U1 |
| 1 | STM32F103T8UX STM32F103T8Ux | QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm | U2 |
| 1 | SAM-M8Q | ublox_SAM-M8Q | U3 |
| 1 | RFM95W-915S2 | XCVR_RFM95W-915S2 | U4 |
| 1 | TPS560430X3FDBVR | SOT-23-6 | U5 |
| 1 | CP2102N-AXX-XQFN20 CP2102N-Axx-xQFN20 | SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U6 |
| 2 | 2N7002 | SOT-23 | Q1, Q2 |
| 1 | 8MHZ 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | Conn_Coaxial | SMA_Amphenol_132289_EdgeMount | J2 |
| 1 | PWRConn | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J3 |
| 1 | SERVO_CONN_1 Servo_Conn_1 | PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | SERVO_CONN_2 Servo_Conn_2 | PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
| 1 | CR2032 | BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 1 | 12UH 12uH | L_1210_3225Metric | L1 |
| 2 | 10PF 10pF | C_0402_1005Metric | C1, C2 |
| 12 | 100NF 100nF | C_0402_1005Metric | C3, C4, C5, C6, C8, C10, C11, C12 +4 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C7, C15 |
| 1 | 22UF 22uF | C_0402_1005Metric | C9 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7UF 4.7uF | C_0402_1005Metric | C18, C19 |
| 5 | 10K 10k | R_0402_1005Metric | R1, R13, R14, R15, R16 |
| 2 | 1k | R_0402_1005Metric | R2, R4 |
| 1 | 2k | R_0402_1005Metric | R3 |
| 8 | 0 | R_0402_1005Metric | R5, R6, R7, R8, R9, R10, R11, R12 |
| 3 | 5.1K | R_0603_1608Metric | R17, R18, R19 |
SPT Altimeter design files
The KiCad project lives in the rah1236/SPT_Altimeter repository on GitHub; these links point at the commit this page was built from.
- LayoutsptAltimeter.kicad_pcb
- SchematicsptAltimeter.kicad_sch
- BOMproduction/bom.csv
SPT Altimeter: common questions
What microcontroller does the SPT Altimeter use?
The SPT Altimeter is built around the STM32F103T8UX, from the STM32 family.
How big is the SPT Altimeter PCB?
The SPT Altimeter measures 45 × 59 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SPT Altimeter?
57 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SPT Altimeter design files?
From the rah1236/SPT_Altimeter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SPT Altimeter design in my own project?
The repository has no license, so all rights stay with rah1236. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SPT Altimeter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k