32 open source boards using the RFM95W-915S2
Real designs built with the RFM95W-915S2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Pulse LoRa
risejohan
98.5 × 34 mm76 parts2LNo license17Avionics payload
usfsoar
78 × 78 mm31 parts2LNo license9ESP8266
Another esp8266 sensor board
brev-dev
54.9 × 95 mm75 parts2LGPL-3.05Lora development boards
leonardoward
69 × 50 mm6 parts2LApache-2.04ESP32
Eja m
leonardoward
51.2 × 97.5 mm91 parts4LApache-2.02ESP32
Minimap
lucapoulos
48 × 55.4 mm74 parts4LNo license2ESP32
Garden133
chl33
71.1 × 39.4 mm54 parts4LMIT2STM32
CNTRL
Arav0001
78 × 78 mm126 parts4LMIT1ESP32
Kuhglocke GS
Queens-Rocket-Engineering-Team
65 × 70 mm115 parts2LNo license1ESP32
Iguana
iowlabs
80 × 50 mm112 parts2LNo license1Sirius
harshil21
42.1 × 75.5 mm57 parts4LMIT1ESP32
LoRa133
chl33
49.5 × 39.4 mm20 parts4LMIT1Microchip SAM
Roamer
ezzatisawesome
39 × 99 mm92 parts4LNo license0Microchip SAM
Mainboard
spacecraft-design-lab-2019
44.4 × 35.8 mm70 parts2LNo license0ESP32
Finder puck
lucy-chapar
72 × 72 mm70 parts4LNo license0STM32
INFERNO
SparrowTheNerd
100 × 75 mm68 parts4LNo license0STM32
SPT Altimeter
rah1236
45 × 59 mm57 parts4LNo license0LoraHubTTGOT5
Uspizig
36.8 × 64 mm56 parts2LCC-BY-NC-4.00Microchip SAM
Bicep
albachten
70 × 85 mm55 parts4LCC0-1.00AVR/Arduino
Survivornode
aneeshlingala
56 × 75 mm16 parts2LNo license0RP2040/RP2350
On-Board-Computer
prasannan-robots
90.1 × 95.3 mm12 parts2LNo license0Zolertia lora breakout
tperale
40.3 × 50 mm10 parts2LNo license0NXP
Avionics ground
usfsoar
86.4 × 59.3 mm21 parts2LNo license9ESP32
Handheld GS
Queens-Rocket-Engineering-Team
65 × 70 mm99 parts2LNo license1Sopdet
harshil21
30.5 × 51.9 mm44 parts4LMIT1Microchip SAM
SpriteSAMD
spacecraft-design-lab-2019
35 × 35 mm35 parts2LNo license0ESP32
Envinode
aneeshlingala
62.2 × 62.2 mm14 parts2LNo license0ESP32
Kuhglocke GS
Queens-Rocket-Engineering-Team
65 × 70 mm115 parts2LNo license3ESP32
Kuhglocke GS
Queens-Rocket-Engineering-Team
65 × 70 mm115 parts2LNo license1AVR/Arduino
Broadcastnode
aneeshlingala
36 × 34.8 mm8 parts2LNo license0ESP32
Handheld GS
Queens-Rocket-Engineering-Team
65 × 70 mm99 parts2LNo license1ESP8266
Oshwi ESP8266 LORA
hulkco
83.9 × 108.8 mm22 partsNo license15
How designs wire the RFM95W-915S2
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the RFM95W-915S2 connects to, and the resistors, capacitors and other passives placed on it.
- The DIO5 pin is left unconnected on 23 of 24 designs.
- The DIO4 pin is left unconnected on 22 of 24 designs (a signal on 2).
- The DIO3 pin is left unconnected on 21 of 24 designs (a signal on 3).
- The 3.3V pin is tied to 3.3V on 20 of 24 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 8, 10 | Connected to: GND 96% | — |
| DIO5pin 7 | Connected to: Not connected 96% | — |
| DIO3pin 11 | Connected to: Not connected 88% | — |
| DIO4pin 12 | Connected to: Not connected 92% | — |
| 3.3Vpin 13 | Connected to: 3.3V 83% · a signal 17% | — |
| DIO2pin 16 | Connected to: Not connected 67% · a signal 33% | — |
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pulse LoRa by risejohan, Oshwi ESP8266 LORA by hulkco, Avionics ground by usfsoar and Another esp8266 sensor board by brev-dev.
The RFM95W-915S2 in open source designs
The gallery holds 32 open source boards using the RFM95W-915S2 from 25 GitHub repositories; a typical one measures about 65 × 70 mm and carries around 57 components.
61% are two-layer designs, the rest use four layers or more, and 28% carry an open source license.
The most starred is Pulse LoRa by risejohan.
Parts used alongside the RFM95W-915S2
Microcontrollers on boards using the RFM95W-915S2
What boards using the RFM95W-915S2 are built for
RFM95W-915S2: common questions
Where can I find a RFM95W-915S2 reference design?
Each of the 32 boards on this page is a real design using the RFM95W-915S2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RFM95W-915S2 DIO5 pin connected?
The DIO5 pin is left unconnected on 23 of 24 designs. Counted from the KiCad layouts of 24 open source designs using the RFM95W-915S2.
How is the RFM95W-915S2 DIO4 pin connected?
The DIO4 pin is left unconnected on 22 of 24 designs (a signal on 2). Counted from the KiCad layouts of 24 open source designs using the RFM95W-915S2.
How is the RFM95W-915S2 DIO3 pin connected?
The DIO3 pin is left unconnected on 21 of 24 designs (a signal on 3). Counted from the KiCad layouts of 24 open source designs using the RFM95W-915S2.
What parts are used alongside the RFM95W-915S2?
The AMS1117-3.3, TP4056, AP2112K-3.3, ACS70331EOLC and CP2102N-Axx-xQFN28 appear in the most repositories here.
Which microcontrollers do boards using the RFM95W-915S2 use?
Most are built on ESP32 (12), Microchip SAM (5), STM32 (3) and ESP8266 (2).
How big is a typical board using the RFM95W-915S2?
The median is 65 × 70 mm, and 61% are two-layer designs.
What is the most popular open source board using the RFM95W-915S2?
By GitHub stars, Pulse LoRa by risejohan, with 17 stars.
Can I simulate one of these boards using the RFM95W-915S2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.