MSP430 Minimal

RandoSY·MSP430_Minimal

MSP430 Minimal PCB layout, top view — open source TI MSP430/CC board by RandoSY

About the MSP430 Minimal PCB

MSP430 Minimal is an open source TI MSP430/CC PCB design by RandoSY, published on GitHub. It is a 2-layer board measuring 109 × 71 mm, with 25 components from 23 distinct parts.

Its main chip is the MSP430G2553IN20, from the TI MSP430/CC family. By type, the board carries 7 resistors, 5 connectors, 4 capacitors, 3 switches, 2 diodes and 1 IC.

It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.

From the project

A simple 2-layer, 109 × 71 mm, mostly through-hole KiCad project inspired by the MSP430 Minimal breakout (not a copy). Designed for MSP430G2553IN20 in a 20-pin DIP socket. All 20 package pins are present on labeled breakout connectors.

A simple 2-layer, 109 × 71 mm, mostly through-hole KiCad project inspired by the MSP430 Minimal breakout (not a copy). Designed for MSP430G2553IN20 in a 20-pin DIP socket. All 20 package pins are present on labeled breakout connectors.

- MSP430G2553LabBoard.kicadpro, .kicadsch, .kicadpcb: open the project, schematic, and routed PCB in KiCad 9 (or compatible). - UMAMSP430.kicadsym, UMAMSP430.pretty/, sym-lib-table, fp-lib-table: project-local custom symbols/footprints; keep these beside the KiCad files. - PCBpreview.png: current copper-layer overview (red: front; blue: back). -…

Main components on the MSP430 Minimal

MSP430 Minimal bill of materials (BOM)

25 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MSP430G2553IN20
U1
1
2N3904
Q1
1
LEFT DIP PINS 1-10
J1
1
RIGHT DIP PINS 20-11
J2
1
UART 3V3
J3
1
SBW DEBUG
J4
1
I2C
J5
1
PASSIVE PIEZO 12mm
BZ1
1
Bourns PTA3043 10k LIN
RV1
1
USER1
SW1
1
USER2
SW2
1
RESET
SW3
1
GREEN
D1
1
AMBER
D2
1
1NF
1nF
C1
1
100NF
100nF
C2
1
10UF
10uF
C3
1
10nF ADC
C4
1
47K
47k
R1
2
4.7k I2C
R2, R3
Show 3 more
QtyPartRefs
2
1k LED
R4, R5
1
1k BASE
R6
1
100k BASE
R7

MSP430 Minimal design files

The KiCad project lives in the RandoSY/MSP430_Minimal repository on GitHub; these links point at the commit this page was built from.

MSP430 Minimal: common questions

What microcontroller does the MSP430 Minimal use?

The MSP430 Minimal is built around the MSP430G2553IN20, from the TI MSP430/CC family.

How big is the MSP430 Minimal PCB?

The MSP430 Minimal measures 109 × 71 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MSP430 Minimal?

25 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MSP430 Minimal design files?

From the RandoSY/MSP430_Minimal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MSP430 Minimal design in my own project?

The repository has no license, so all rights stay with RandoSY. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MSP430 Minimal without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

Similar boards