HDMI PICO
raybello·KICAD-PCBs·HDMI_PICO/HDMI_PICO.kicad_pcb
About the HDMI PICO PCB
HDMI PICO is an open source RP2040/RP2350 PCB design by raybello, published on GitHub. It is a 2-layer board measuring 33.9 × 78.2 mm, with 11 components from 7 distinct parts.
Its main chip is the TPS5430DDAR, from the RP2040/RP2350 family. By type, the board carries 8 resistors, 1 IC, 1 connector and 1 switch.
From the project
Repository for KICAD PCB Designs
Main components on the HDMI PICO
HDMI PICO bill of materials (BOM)
11 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5430DDAR Pico | RPi_Pico_SMD_TH | U1 |
| 1 | HDMI_A_1.4 | EDAC 690-019-298-412 | J1 |
| 1 | C92589 SW_Push | SW_SPST_PTS810 | SW1 |
| 1 | 3.24K 270R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 10K 270R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 4 | 270R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4, R7, R8 |
| 2 | 4K7 270R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6 |
HDMI PICO design files
The KiCad project lives in the raybello/KICAD-PCBs repository on GitHub; these links point at the commit this page was built from.
HDMI PICO: common questions
What microcontroller does the HDMI PICO use?
The HDMI PICO is built around the TPS5430DDAR, from the RP2040/RP2350 family.
How big is the HDMI PICO PCB?
The HDMI PICO measures 33.9 × 78.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HDMI PICO?
11 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HDMI PICO design files?
From the raybello/KICAD-PCBs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HDMI PICO design in my own project?
The repository has no license, so all rights stay with raybello. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HDMI PICO without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in KICAD-PCBs
RP2040/RP2350
Linux Version Purple
raybello
67.6 × 49.5 mm295 parts4LNo license0ESP32
VolPak-1000
raybello
153.7 × 108.5 mm185 parts4LNo license0RP2040/RP2350
CM4IOv5
raybello
160 × 90 mm137 parts4LNo license0Raspberry Pi
SIL-CM4
raybello
110.9 × 143.4 mm74 parts4LNo license0VoltPakV2
raybello
105.4 × 190.3 mm70 parts2LNo license0RP2040/RP2350
PiUAV
raybello
30 × 65 mm67 parts4LNo license0RP2040/RP2350
Hermes v1
raybello
22 × 46.9 mm31 parts4LNo license0RP2040/RP2350
Hermes Pico
raybello
53 × 65 mm21 parts2LNo license0Dvi sock
raybello
25.3 × 22.5 mm13 parts2LNo license0SensorModule
raybello
19.7 × 19.7 mm11 parts2LNo license0
Similar boards
RP2040/RP2350
Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k