STM32-Battleship
Realvideogame·STM32-Battleship·pcb/stm32f091-ref/stm32f091.kicad_pcb
About the STM32-Battleship PCB
STM32-Battleship is an open source STM32 PCB design by Realvideogame, published on GitHub under the MIT license. It is a 4-layer board measuring 20.3 × 85.1 mm, with 46 components from 25 distinct parts.
Its main chip is the STM32F091RCTx, from the STM32 family. Other key parts include the LD1117S33TR_SOT223. By type, the board carries 14 capacitors, 11 resistors, 6 LEDs, 5 connectors, 3 switches and 2 ICs.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
battleship
This project was developed as part of ECE 36200 - Microcontroller Systems and Interfacing at Purdue University. The implementation includes elements of both hardware and software design, leveraging the STM32F091 microcontroller to recreate the classic game of Battleship.
Developed with a focus on embedded systems programming and hardware/software integration.
Main components on the STM32-Battleship
STM32-Battleship bill of materials (BOM)
46 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F091RCTx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | 32.768kHz(12.5pF) | ECX-.327-CDX-1293 | X1 |
| 1 | 8MHz(20pF) | Crystal_SMD_3225-4Pin_3.2x2.5mm | X2 |
| 2 | Conn_01x30_Male | HTSW-130-22-T-S | J1, J2 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 2 | Conn_02x03_Odd_Even | PinHeader_2x03_P1.27mm_Vertical | J4, J5 |
| 3 | SW_Push | SW_SPST_PTS645 | SW1, SW2, SW3 |
| 2 | LED_Red | LED_0805_2012Metric | LD1, LD6 |
| 2 | LED_Green | LED_0805_2012Metric | LD2, LD4 |
| 1 | LED_Blue | LED_0805_2012Metric | LD3 |
| 1 | LED_Yellow | LED_0805_2012Metric | LD5 |
| 2 | BAT60JFILM | D_SOD-323 | D1, D2 |
| 1 | Ferrite Bead | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 2 | 22uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 8 | .1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C11 |
| 2 | 12pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12, C13 |
| 2 | 20pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14, C15 |
| 1 | 5.1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 4 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R4, R5, R8 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R10 |
| 1 | 3k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 2k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | 510 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 390 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
STM32-Battleship design files
The KiCad project lives in the Realvideogame/STM32-Battleship repository on GitHub; these links point at the commit this page was built from.
STM32-Battleship: common questions
What microcontroller does the STM32-Battleship use?
The STM32-Battleship is built around the STM32F091RCTx, from the STM32 family.
How big is the STM32-Battleship PCB?
The STM32-Battleship measures 20.3 × 85.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32-Battleship?
46 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32-Battleship design files?
From the Realvideogame/STM32-Battleship repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32-Battleship design in my own project?
Yes, under the terms of its MIT license, which Realvideogame chose for the repository.
Can I test firmware for the STM32-Battleship without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k