HardLabs

USBEMBEDED

RedBulletTooling·crypsis-public·hardware/baseboard/embedded/USBEMBEDED.kicad_pcb

USBEMBEDED PCB layout, top view — open source AVR/Arduino board by RedBulletTooling

About the USBEMBEDED PCB

USBEMBEDED is an open source AVR/Arduino PCB design by RedBulletTooling, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 41.7 × 17.6 mm, with 33 components from 17 distinct parts.

Its main chip is the ATMEGA32U4-MU, from the AVR/Arduino family. Other key parts include the PIC24FJ64GB002-I_ML, TCR5RG33A,LF, TXB0104RUTR_0 and EC14-2AP. By type, the board carries 5 ICs and 1 capacitor.

It belongs with the iot & wireless and test & measurement designs in this gallery.

From the project

This contains, all files from hardware to software production and all to make Crypsis

This project has been created and developed by Matthijs Vogel and Luc Pluimakers.

Detailed documenatation can be found on our gitbook link here: https://redbullettooling.gitbook.io/keyvilboard-apt/

Hardware - Every chip, fully programmable, fully open-source. 4G (NB-iot/LTE-M) with encrypted TLS/SSL communication and authentication. - Secure modem with the latest anti-tamper measurements. - Only communicate, when you want it. True silent mode, undectectable on the RF spectrum. - Remotely disable the keyboard for damage prevention on entry.

Main components on the USBEMBEDED

ATMEGA32U4-MUPIC24FJ64GB002-I_MLTCR5RG33A,LFTXB0104RUTR_0EC14-2AP

USBEMBEDED bill of materials (BOM)

33 components, 17 distinct parts.

QtyPartRefs
1
ATMEGA32U4-MU
IC2
1
PIC24FJ64GB002-I_ML
IC3
1
TCR5RG33A,LF
IC4
1
TXB0104RUTR_0
IC5
1
EC14-2AP
U1
3
02016D104KAT2A
0.1uF1, 0.1uF2, 0.1uF5
7
GRM033C80J105ME05D
0.1uF3, 0.1uF4, 1uF1, 1uF2, 1uF3, 1uF4, 1uF5
4
4-103327-3
5V+1, GND1, RX1, TX1
2
ERA-1AEB103C
10KOhm1, 10KOhm2
2
GRM155C80J106ME11D
10uF1, 10uF2
2
CSTNE16M0VH3C000R0
16Mhz1, 16Mhz2
2
RC0201JR-7D22RL
22Ohm1, 22Ohm2
2
1725672
KEYBOARDSIDE1, PCSIDE1
1
TPS2041CDBVT
KEYPWR1
1
LP5912-5.0DRVR
PS1
1
104031-0811
SD1
1
GRM31CR60J157ME11L
C1

USBEMBEDED design files

The KiCad project lives in the RedBulletTooling/crypsis-public repository on GitHub; these links point at the commit this page was built from.

USBEMBEDED: common questions

What microcontroller does the USBEMBEDED use?

The USBEMBEDED is built around the ATMEGA32U4-MU, from the AVR/Arduino family.

How big is the USBEMBEDED PCB?

The USBEMBEDED measures 41.7 × 17.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USBEMBEDED?

33 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the USBEMBEDED design files?

From the RedBulletTooling/crypsis-public repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the USBEMBEDED design in my own project?

Yes, under the terms of its Apache-2.0 license, which RedBulletTooling chose for the repository.

Can I test firmware for the USBEMBEDED without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in crypsis-public

Similar boards