HardLabs

Nrfmodule

RedBulletTooling·crypsis-public·hardware/nrf9160/nrf9160/nrfmodule.kicad_pcb

Nrfmodule PCB layout, top view — open source Nordic nRF board by RedBulletTooling

About the Nrfmodule PCB

Nrfmodule is an open source Nordic nRF PCB design by RedBulletTooling, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 26.8 × 17.3 mm, with 35 components from 19 distinct parts.

Its main chip is the NRF9160-SICA-B1A-R, from the Nordic nRF family. Other key parts include the TCR5RG18A,LF and U.FL-R-SMT_10_. By type, the board carries 3 ICs and 1 resistor.

It belongs with the iot & wireless and test & measurement designs in this gallery.

From the project

This contains, all files from hardware to software production and all to make Crypsis

This project has been created and developed by Matthijs Vogel and Luc Pluimakers.

Detailed documenatation can be found on our gitbook link here: https://redbullettooling.gitbook.io/keyvilboard-apt/

Hardware - Every chip, fully programmable, fully open-source. 4G (NB-iot/LTE-M) with encrypted TLS/SSL communication and authentication. - Secure modem with the latest anti-tamper measurements. - Only communicate, when you want it. True silent mode, undectectable on the RF spectrum. - Remotely disable the keyboard for damage prevention on entry.

Main components on the Nrfmodule

TCR5RG18A,LFU.FL-R-SMT_10_

Nrfmodule bill of materials (BOM)

35 components, 19 distinct parts.

QtyPartRefs
1
TCR5RG18A,LF
IC1
2
U.FL-R-SMT_10_
U.FL1, U.FL2
2
02016D104KAT2A
0,1uF1, 0,1uF2
5
GRM033C80J105ME05D
1uF1, 1uF2, 1uF3, 1uF4, 1uF5
2
GRM035R60J475ME15D
4.7uF3, 4.7uF4
1
LP5912-5.0DRVR
5.0V1
4
4-103327-3
5V+1, GND1, RX1, TX1
1
ERA-1AEB103C
10KOhm1
2
885392004002
15pF1, 15pF2
2
0805ZD476MAT2A
47uF1, 47uF2
4
GRM033R60J104KE19J
100nF1, 100nF2, 100nF3, 100nF4
2
GRM31CR60J227ME11L
220uF1, 220uF2
1
EC14-2AP
Edge_Connect1
1
MMZ1005S121HTD25
FL1
1
SF72S006VBDR2500
NANOSIM1
1
NRF9160-SICA-B1A-R
NRF91
1
CM1402-03CP
SIMESDPROTECT1
1
TXB0102YZPR
TXB102
1
CR0201AFW-1001GLF
R5

Nrfmodule design files

The KiCad project lives in the RedBulletTooling/crypsis-public repository on GitHub; these links point at the commit this page was built from.

Nrfmodule: common questions

What microcontroller does the Nrfmodule use?

The Nrfmodule is built around the NRF9160-SICA-B1A-R, from the Nordic nRF family.

How big is the Nrfmodule PCB?

The Nrfmodule measures 26.8 × 17.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Nrfmodule?

35 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Nrfmodule design files?

From the RedBulletTooling/crypsis-public repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Nrfmodule design in my own project?

Yes, under the terms of its Apache-2.0 license, which RedBulletTooling chose for the repository.

Can I test firmware for the Nrfmodule without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in crypsis-public

Similar boards