HardLabs

R-007 ACELEROGRAFO ADXL355 V5

RedSismicaAustro·RSA-Intern-SHM·KiCad/projects/nodo/R-007 ACELEROGRAFO ADXL355 V5.kicad_pcb

R-007 ACELEROGRAFO ADXL355 V5 PCB layout, top view — open source PIC board by RedSismicaAustro

About the R-007 ACELEROGRAFO ADXL355 V5 PCB

R-007 ACELEROGRAFO ADXL355 V5 is an open source PIC PCB design by RedSismicaAustro, published on GitHub. It is a 2-layer board measuring 84.9 × 66.1 mm, with 33 components from 17 distinct parts.

Its main chip is the DSPIC33EP256MC202-I/SP, from the PIC family. Other key parts include the LM1117DT-5.0NOPB, LD33V, ADXL355Z, MAX485 and LM7805_TO220. By type, the board carries 13 capacitors, 7 ICs, 7 resistors, 4 connectors and 2 diodes.

From the project

Repositorio para la migración de proyectos electrónicos desde Altium Designer hacia KiCad 10 desarrollados para el sistema RSA Structural Health Monitoring (SHM).

Repositorio para la migración de proyectos electrónicos desde Altium Designer hacia KiCad 10 desarrollados para el sistema RSA Structural Health Monitoring (SHM).

El propósito de este repositorio es preservar los diseños electrónicos existentes, reemplazar las bibliotecas propietarias utilizadas en Altium por bibliotecas locales compatibles con KiCad y establecer un flujo de trabajo estandarizado para el mantenimiento del hardware mediante herramientas de código abierto.

Main components on the R-007 ACELEROGRAFO ADXL355 V5

DSPIC33EP256MC202-I/SPLM1117DT-5.0NOPBLD33VADXL355ZMAX485LM7805_TO220

R-007 ACELEROGRAFO ADXL355 V5 bill of materials (BOM)

33 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DSPIC33EP256MC202-I/SP
U1
1
LM1117DT-5.0NOPB
U2
1
LD33V
U3
1
ADXL355Z
U4
2
MAX485
U5, U9
1
LM7805_TO220
U6
1
${ALTIUM_VALUE}${VALUEAUX}
J1
2
54602-908LF
J2, J3
1
Grabador
P1
1
1N4148WS
D1
1
LED3
D3
1
C2858857
Cap
C1
8
C1525
Cap
C2, C4, C5, C7, C8, C11, C13, C16
1
C970695
Cap
C3
2
C15195
Cap
C6, C9
1
C29266
Cap
C10
7
RES1
Res1
R1, R2, R3, R4, R6, R13, R14

R-007 ACELEROGRAFO ADXL355 V5 design files

The KiCad project lives in the RedSismicaAustro/RSA-Intern-SHM repository on GitHub; these links point at the commit this page was built from.

R-007 ACELEROGRAFO ADXL355 V5: common questions

What microcontroller does the R-007 ACELEROGRAFO ADXL355 V5 use?

The R-007 ACELEROGRAFO ADXL355 V5 is built around the DSPIC33EP256MC202-I/SP, from the PIC family.

How big is the R-007 ACELEROGRAFO ADXL355 V5 PCB?

The R-007 ACELEROGRAFO ADXL355 V5 measures 84.9 × 66.1 mm, has 2 copper layers and is 0.41116 mm thick.

How many components are on the R-007 ACELEROGRAFO ADXL355 V5?

33 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the R-007 ACELEROGRAFO ADXL355 V5 design files?

From the RedSismicaAustro/RSA-Intern-SHM repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the R-007 ACELEROGRAFO ADXL355 V5 design in my own project?

The repository has no license, so all rights stay with RedSismicaAustro. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the R-007 ACELEROGRAFO ADXL355 V5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in RSA-Intern-SHM

Similar boards