ReFatGary
reinauer·ReFatGary·KiCAD/ReFatGary.kicad_pcb
About the ReFatGary PCB
ReFatGary is an open source PCB design by reinauer, published on GitHub. It is a 2-layer board measuring 39.2 × 41.5 mm, with 14 components from 10 distinct parts.
Other key parts include the FATGARY_PLCC84, XC95144XL-TQ100 and LD1117AS33. By type, the board carries 7 capacitors, 3 ICs, 2 resistors, 1 connector and 1 test point.
It belongs with the retro computing designs in this gallery.
From the project
Amiga 3000/4000 FatGary implementation using XC95144XL-TQ100
ReFatGary replaces Fat Gary, the system controller gate array of the Amiga 3000 and Amiga 4000 (Commodore part 390540-02). It is a small board built around a Xilinx XC95144XL CPLD. A PLCC-84 plug on its bottom side goes into the Gary socket on the mainboard.
The board is the ReRamsey v2 board with the plug pins rewired for Fat Gary. The gateware is a translation of the Commodore gate array schematic (Docs/FatGary.pdf) into VHDL.
Main components on the ReFatGary
ReFatGary bill of materials (BOM)
14 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FATGARY_PLCC84 | APW9328B | IC1 |
| 1 | XC95144XL-TQ100 | TQ100 | IC2 |
| 1 | LD1117AS33 | SOT223 | IC3 |
| 1 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | TPB1,27 | B1,27 | TP1 |
| 2 | 10U 10u | C0805 | C1, C3 |
| 1 | 100N 100n | C0805 | C2 |
| 4 | 100N 100n | C0603K | C4, C5, C6, C7 |
| 1 | R-EU_R0603 | R0603 | R1 |
| 1 | 4K7 4k7 | 0603-ARC | RN1 |
ReFatGary design files
The KiCad project lives in the reinauer/ReFatGary repository on GitHub; these links point at the commit this page was built from.
ReFatGary: common questions
How big is the ReFatGary PCB?
The ReFatGary measures 39.2 × 41.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ReFatGary?
14 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ReFatGary design files?
From the reinauer/ReFatGary repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ReFatGary design in my own project?
The repository has no license, so all rights stay with reinauer. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k