ReRamsey
reinauer·ReRamsey·KiCAD/ReRamsey.kicad_pcb
About the ReRamsey PCB
ReRamsey is an open source PCB design by reinauer, published on GitHub. It is a 2-layer board measuring 37.2 × 37.2 mm, with 14 components from 10 distinct parts.
Other key parts include the RAMSEY_PLCC84, XC95144XL-TQ100 and LD117A?S. By type, the board carries 7 capacitors, 3 ICs, 2 resistors, 1 connector and 1 test point.
It belongs with the retro computing designs in this gallery.
From the project
Amiga 3000/4000 Ramsey re-implementation using XC95144XL-TQ100
ReRamsey replaces RAMSEY, the DRAM controller of the Amiga 3000 and Amiga 4000 (Commodore part 390541, revision -07). It is a small board built around a Xilinx XC95144XL CPLD. A PLCC-84 plug on its bottom side goes into the RAMSEY socket on the mainboard.
Status: the firmware passes a timing simulation of the fitted CPLD on both boards, at 16 and 25 MHz, with 256K and 1M DRAMs and with 80 ns and 60 ns parts. The testbench models an A3000 (68030, Gary, Super DMAC).
Main components on the ReRamsey
ReRamsey bill of materials (BOM)
14 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RAMSEY_PLCC84 | APW9328TH | IC1 |
| 1 | XC95144XL-TQ100 | TQ100 | IC2 |
| 1 | LD117A?S | SOT223 | IC3 |
| 1 | 87758-0616 | 87758-0616 | J1 |
| 1 | TPB1,27 | B1,27 | TP1 |
| 2 | 10u | C0805 | C1, C3 |
| 1 | 100n | C0805 | C2 |
| 4 | 100n | C0603K | C4, C5, C6, C7 |
| 1 | R-EU_R0603 | R0603 | R1 |
| 1 | 4k7 | 0603-ARC | RN1 |
ReRamsey design files
The KiCad project lives in the reinauer/ReRamsey repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCAD/ReRamsey.kicad_pcb
- SchematicKiCAD/ReRamsey.kicad_sch
ReRamsey: common questions
How big is the ReRamsey PCB?
The ReRamsey measures 37.2 × 37.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ReRamsey?
14 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the ReRamsey design files?
From the reinauer/ReRamsey repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ReRamsey design in my own project?
The repository has no license, so all rights stay with reinauer. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k