RayRigAntSw
RFStateSide·RayRigAntSw·hardware/RayRigAntSw.kicad_pcb
About the RayRigAntSw PCB
RayRigAntSw is an open source PCB design by RFStateSide, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 85 × 130 mm, with 24 components from 7 distinct parts.
By type, the board carries 8 connectors, 6 capacitors, 5 relays and 5 diodes.
It belongs with the rf & radio and audio designs in this gallery.
From the project
RF relay switching board for radio, antenna, and amplifier routing. Public Engineering Reference — AS-IS.
RayRigAntSw is RF StateSide LLC's through-hole RF relay board for selecting two rigs, three antennas and an amplifier/bypass path.
Public Engineering Reference — AS-IS. The editable design, BOM and manufacturing files support study, independent construction, modification and community improvement.
Five 12 V SPDT relays provide RF routing through external low-side drivers. Two PTT connections pass to the external controller. RaySspaController supplied the drivers and sequencing used in our original integration test; another controller can use the documented interface.
RayRigAntSw bill of materials (BOM)
24 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | PE45478 Conn_UHF Pasternack | SO_239 | J1, J2, J3, J4, J5 |
| 2 | RCJ-021 Same Sky | CUI_RCJ-021 | J6, J7 |
| 1 | OSTVN08A150 Screw_Terminal_01x08 On Shore Technology | TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal | J8 |
| 5 | G2RL-14-E DC12 G2RL-1-E Omron | Relay_SPDT_Omron_G2RL-1-E | K1, K2, K3, K4, K5 |
| 5 | 1N5819-TP 1N5819 MCC | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5 |
| 5 | B32529C0103K289 .01 µF EPCOS - TKD Electronics | CAPRR500W50L730T250H650 | C1, C2, C3, C4, C5 |
| 1 | RDEC71E476MWK1H03B 47 µF Murata | CAPRR500W50L730T250H650 | C6 |
RayRigAntSw design files
The KiCad project lives in the RFStateSide/RayRigAntSw repository on GitHub; these links point at the commit this page was built from.
RayRigAntSw: common questions
How big is the RayRigAntSw PCB?
The RayRigAntSw measures 85 × 130 mm, has 2 copper layers and is 1.6346 mm thick.
How many components are on the RayRigAntSw?
24 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RayRigAntSw design files?
From the RFStateSide/RayRigAntSw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RayRigAntSw design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which RFStateSide chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687