MiniKeyboard-CH552 Gadget

rgomez31UAQ·MiniKeyboard-CH552_Gadget·v2/pcb/idawgz32/idawgz32.kicad_pcb

MiniKeyboard-CH552 Gadget PCB layout, top view — open source WCH CH32/CH55x board by rgomez31UAQ

About the MiniKeyboard-CH552 Gadget PCB

MiniKeyboard-CH552 Gadget is an open source WCH CH32/CH55x PCB design by rgomez31UAQ, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 98.7 × 45.5 mm, with 81 components from 10 distinct parts.

Its main chip is the CH552T, from the WCH CH32/CH55x family. By type, the board carries 34 switches, 32 diodes, 3 resistors, 2 capacitors, 1 IC and 1 connector.

From the project

Un mini teclado mecánico completo de 32 teclas basado en el chip CH552

Un teclado de bolsillo experimental, ultraportátil y muy asequible, cuya fabricación cuesta menos de 5 dólares en materiales. El objetivo del proyecto es hacer un teclado que se puede dar como obsequios o regalos. Todo el PCBA puede ser producido por JLCPCB. Utiliza un CH552 como MCU, y ejecuta el firmware FAK.

Recomiendo esperar a que salga la v2.0, aunque la v0.0 tiene algunas soluciones que se describen en la entrada de mi blog.

MiniKeyboard-CH552 Gadget, from the project README
From the project README

Main components on the MiniKeyboard-CH552 Gadget

MiniKeyboard-CH552 Gadget bill of materials (BOM)

81 components, 10 distinct parts.

QtyPartRefs
1
CH552T
U1
1
USB_C_Receptacle_USB2.0
J1
8
MountingHole_Pad
H1, H2, H3, H4, H5, H6, H7, H8
32
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +24
1
BOOT
SW41
1
RESET
SW42
32
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +24
2
100nF
C1, C2
1
10k
R1
2
5.1k
R4, R5

MiniKeyboard-CH552 Gadget design files

The KiCad project lives in the rgomez31UAQ/MiniKeyboard-CH552_Gadget repository on GitHub; these links point at the commit this page was built from.

MiniKeyboard-CH552 Gadget: common questions

What microcontroller does the MiniKeyboard-CH552 Gadget use?

The MiniKeyboard-CH552 Gadget is built around the CH552T, from the WCH CH32/CH55x family.

How big is the MiniKeyboard-CH552 Gadget PCB?

The MiniKeyboard-CH552 Gadget measures 98.7 × 45.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MiniKeyboard-CH552 Gadget?

81 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the MiniKeyboard-CH552 Gadget design files?

From the rgomez31UAQ/MiniKeyboard-CH552_Gadget repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MiniKeyboard-CH552 Gadget design in my own project?

Yes, under the terms of its GPL-3.0 license, which rgomez31UAQ chose for the repository.

Can I test firmware for the MiniKeyboard-CH552 Gadget without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.

Similar boards