Blah2
rianhunter·blah2·kicad/vhs-rf-amp-ada4857.kicad_pcb
About the Blah2 PCB
Blah2 is an open source PCB design by rianhunter, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 41 × 26 mm, with 15 components from 6 distinct parts.
Other key parts include the ADA4857-1YRZ and DS8604-A0S3. By type, the board carries 10 capacitors, 3 ICs and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
An [ADA4857][ada4857-datasheet] based, configurable, dual channel amplifier and line driver for [VHS decode][vhs-decode]. The board is intended to be permanently mounted into a chosen VHS player, providing an amplified, 75 Ohms impedance output for the video and HiFi audio RF sig
An [ADA4857][ada4857-datasheet] based, configurable, dual channel amplifier and line driver for [VHS decode][vhs-decode]. The board is intended to be permanently mounted into a chosen VHS player, providing an amplified, 75 Ohms impedance output for the video and HiFi audio RF signals. Find gerbers, BOM and pick'n'place files ready for fabrication over in the releases section. Most of the boards are pre-assembled, but you will need to choose (and solder) the appropriate components fitting for your VHS player for final installation.

Main components on the Blah2
Blah2 bill of materials (BOM)
15 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ADA4857-1YRZ | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | DS8604-A0S3 | SOT-23-3 | U3 |
| 4 | C96446 10uf | C_0603_1608Metric | C1, C2, C11, C21 |
| 4 | C96123 47uf | C_1206_3216Metric | C12, C13, C22, C23 |
| 2 | 100N 100nf | C_0603_1608Metric | C14, C24 |
| 2 | 75 | R_0603_1608Metric | R15, R25 |
Blah2 design files
The KiCad project lives in the rianhunter/blah2 repository on GitHub; these links point at the commit this page was built from.
Blah2: common questions
How big is the Blah2 PCB?
The Blah2 measures 41 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blah2?
15 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Blah2 design files?
From the rianhunter/blah2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Blah2 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which rianhunter chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687