SAILFACE

rmcl·sailface·schematics/sailface-mega-shield/sailface-mega-shield.kicad_pcb

SAILFACE PCB layout, top view — open source AVR/Arduino board by rmcl

About the SAILFACE PCB

SAILFACE is an open source AVR/Arduino PCB design by rmcl, published on GitHub. It is a 2-layer board measuring 101.6 × 53.3 mm, with 36 components from 21 distinct parts.

Its main chip is the ARDUINO_POWER, from the AVR/Arduino family. By type, the board carries 13 connectors, 6 resistors, 3 capacitors and 1 diode.

It belongs with the dev boards & breakouts and power & battery designs in this gallery.

From the project

An autonomous (non-sail powered) boat thing.

An autonomous (non-sail powered) boat thing.

Runs on an arduino MEGA. This code manages navigation, communication and power management.

Python code for controling sailface remotely.

This module is a lambda function that will receive the messages relayed from the Iridium Short-Burst Data (SBD) network via the RockBLOCK service (https://docs.rockblock.rock7.com/docs/getting-started).

SAILFACE bill of materials (BOM)

36 components, 21 distinct parts.

QtyPartRefs
1
Digital
P1
1
Power
P2
2
Analog
P3, P4
1
PWM
P5
1
PWM
P6
1
Communication
P7
6
CONN_01X01
P8, P9, P10, P11, P12, P13
1
ARDUINO_POWER
ARDUINO_POWER1
1
BAT_CURRENT_SENSOR
BATCURRENT1
1
BLUETOOTH
BLUETOOTH1
4
2N3904
BLUETOOTH_TOGGLE1, GPS_TOGGLE1, IRIDIUM_TOGGLE1, MPU_TOGGLE1
1
GPS
GPS1
1
IRIDIUM
IRIDIUM1
1
MOTOR_POWER
MOTOR_POWER1
1
MPU
MPU1
1
Battery
PRIMARY_BATTERY1
1
RUDDER_SERVO
RUDDER_SERVO1
1
D_Schottky
D1
3
C
C1, C2, C3
5
1K
R1, R2, R3, R4, R6
Show 1 more
QtyPartRefs
1
4.7K
R5

SAILFACE design files

The KiCad project lives in the rmcl/sailface repository on GitHub; these links point at the commit this page was built from.

SAILFACE: common questions

What microcontroller does the SAILFACE use?

The SAILFACE is built around the ARDUINO_POWER, from the AVR/Arduino family.

How big is the SAILFACE PCB?

The SAILFACE measures 101.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SAILFACE?

36 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the SAILFACE design files?

From the rmcl/sailface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SAILFACE design in my own project?

The repository has no license, so all rights stay with rmcl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SAILFACE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in sailface

Similar boards