Sailboard esp
rmcl·sailface·schematics/sailboard-esp/sailboard-esp.kicad_pcb
About the Sailboard esp PCB
Sailboard esp is an open source ESP32 PCB design by rmcl, published on GitHub. It is a 2-layer board measuring 91.4 × 51.4 mm, with 34 components from 30 distinct parts.
Its main chip is the ESP32-DEVKITC, from the ESP32 family. Other key parts include the TXB0108PWR, AP2112K-3.3 and L293D. By type, the board carries 7 resistors, 4 capacitors, 3 ICs and 2 diodes.
From the project
An autonomous (non-sail powered) boat thing.
Version 1.1 --------------------- * Moved towards using a buck converter from Vin to 5V and then a simple linear regulator for 5v to 3.3v
Version 1.2 ------------------ * Added dampening capacitor next to servo.
Main components on the Sailboard esp
Sailboard esp bill of materials (BOM)
34 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TXB0108PWR | SOP65P640X120-20N | IC1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | L293D | DIP-16_W7.62mm | U2 |
| 1 | ArduCamShield_OV2640 | PinHeader_1x08_P2.54mm_Vertical | ArduCam1 |
| 1 | BatteryCharge | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BATCHRG1 |
| 1 | BatteryInput | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BATIN1 |
| 1 | QMC5883L | PinHeader_1x05_P2.54mm_Vertical | COMPASS1 |
| 2 | INA219BxD | SOIC-8_3.9x4.9mm_P1.27mm | CURRENT_MAIN1, CURRENT_SOLAR1 |
| 1 | ESP32-DEVKITC | MODULE_ESP32-DEVKITC-RESIZED | ESP32 |
| 1 | GPS | PinHeader_1x04_P2.54mm_Vertical | GPS1 |
| 1 | IRIDIUM | Molex_PicoBlade_53047-1010_1x10_P1.25mm_Vertical | IRIDIUM1 |
| 1 | MainPowerSwitch | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | MAINSWITCH1 |
| 1 | Micro_SD_Card | microSD_HC_Molex_104031-0811 | MICRO_SD1 |
| 1 | MOTOR | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | MOTOR1 |
| 1 | RADIO | PinHeader_1x04_P2.54mm_Vertical | RADIO1 |
| 1 | RUDDERSERVO | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | RUDDER1 |
| 2 | 100mOhms | R_2512_6332Metric | R_SHUNT1, R_SHUNT2 |
| 1 | MPM3610AGQV-P | MPM3620AGQV-P | Regulator5V1 |
| 1 | SolarPanel | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SOLARIN1 |
| 1 | D_Schottky | D_5W_P5.08mm_Vertical_AnodeUp | D1 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED | LED_0603_1608Metric | D2 |
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 470uF | CP_Radial_D8.0mm_P3.50mm | C4 |
| 1 | 1K | R_0603_1608Metric | R1 |
| 1 | 53.6K | R_0603_1608Metric | R2 |
| 2 | 100K | R_0603_1608Metric | R3, R4 |
| 1 | 19.1K | R_0603_1608Metric | R5 |
| 2 | 47K ARRAY | RESCAXE80P320X160X70-8N | R6, R7 |
Sailboard esp design files
The KiCad project lives in the rmcl/sailface repository on GitHub; these links point at the commit this page was built from.
Sailboard esp: common questions
What microcontroller does the Sailboard esp use?
The Sailboard esp is built around the ESP32-DEVKITC, from the ESP32 family.
How big is the Sailboard esp PCB?
The Sailboard esp measures 91.4 × 51.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sailboard esp?
34 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sailboard esp design files?
From the rmcl/sailface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sailboard esp design in my own project?
The repository has no license, so all rights stay with rmcl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sailboard esp without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sailface
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k