Just a dice
rmingon·just-a-dice·hardware/hardware.kicad_pcb
About the Just a dice PCB
Just a dice is an open source RISC-V PCB design by rmingon, published on GitHub. It is a 2-layer board measuring 45 × 45 mm, with 27 components from 8 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. Other key parts include the AMS1117-3.3. By type, the board carries 8 resistors, 6 diodes, 4 capacitors, 2 ICs and 2 connectors.
It belongs with the displays & leds designs in this gallery.
From the project
Electronic dice with CH32V003 RISC-V microcontroller. Press the PCB bottom to roll - 6 LEDs display random results. USB-powered, compact 45mm design.
An electronic dice based on the CH32V003 RISC-V microcontroller with bottom-mounted switch activation.
This project is a compact electronic dice that uses bottom-mounted switch buttons for activation. Simply press the PCB from the bottom to activate the switches and generate a random number displayed on 6 LEDs arranged in a traditional dice pattern.
- Microcontroller: CH32V003F4P6 (RISC-V 32-bit) - Display: 6 LEDs arranged in dice pattern (D1-D6) - Input: 4 touch-sensitive pads on bottom (pad1-pad4) - Power: Micro USB connector with onboard 3.3V regulation - Programming: SWD interface with…

Main components on the Just a dice
Just a dice bill of materials (BOM)
27 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V003F4P6 | SOP65P640X121-20N | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194_Horizontal | J2 |
| 1 | Conn_01x05_Pin | PinSocket_1x05_P2.54mm_Horizontal | J3 |
| 5 | SW_Push | SW_SPST_FSMSM | BOOT5, pad1, pad2, pad3, pad4 |
| 6 | LED | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6 |
| 4 | C | C_0603_1608Metric | C1, C2, C3, C4 |
| 8 | R_Small | R_0603_1608Metric | R2, R5, R6, R7, R8, R9, R10, R11 |
Just a dice design files
The KiCad project lives in the rmingon/just-a-dice repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/hardware.kicad_pcb
- Schematichardware/hardware.kicad_sch
Just a dice: common questions
What microcontroller does the Just a dice use?
The Just a dice is built around the CH32V003F4P6, from the RISC-V family.
How big is the Just a dice PCB?
The Just a dice measures 45 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Just a dice?
27 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Just a dice design files?
From the rmingon/just-a-dice repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Just a dice design in my own project?
The repository has no license, so all rights stay with rmingon. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Just a dice without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105