Eurorack power busboard
robaru·eurorack-power-busboard
About the Eurorack power busboard PCB
Eurorack power busboard is an open source PCB design by robaru, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 189.9 × 30.5 mm, with 26 components from 19 distinct parts.
By type, the board carries 11 connectors, 6 capacitors, 3 diodes, 3 inductors and 3 resistors.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
Passive Eurorack power busboard: 10 headers, filtering, LEDs, THT. Based on the moPsy Eurorack Power Breakout.
A passive power busboard for a Eurorack case, based on the Eurorack Power Breakout by Stefan Haun (moPsy project). I took Stefan KiCad project as a starting point and started playing around with it to create the busboard to power my modules.
10 Eurorack power headers (2×8, with +5V, CV and Gate) Power input on a 4-pin WAGO screw terminal (+12V, GND, -12V, +5V) Basic filtering on each rail (ferrite bead, 100n and 10u) One LED per rail (+12V, -12V, +5V) * Through-hole parts only, 190 × 31 mm, two M3 mounting holes

Eurorack power busboard bill of materials (BOM)
26 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PWR1 | PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | PWR2 | PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | PWR3 | PinHeader_2x08_P2.54mm_Vertical | J3 |
| 1 | PWR4 | PinHeader_2x08_P2.54mm_Vertical | J4 |
| 1 | PWR5 | PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | PWR9 | PinHeader_2x08_P2.54mm_Vertical | J6 |
| 1 | PWR8 | PinHeader_2x08_P2.54mm_Vertical | J7 |
| 1 | PWR7 | PinHeader_2x08_P2.54mm_Vertical | J8 |
| 1 | PWR6 | PinHeader_2x08_P2.54mm_Vertical | J9 |
| 1 | PWR10 | PinHeader_2x08_P2.54mm_Vertical | J10 |
| 1 | SCREW_TERMINAL_01X04 Screw_Terminal_01x04 | TerminalBlock_WAGO_236-104_1x04_P5.00mm_45Degree | J11 |
| 1 | +5V | LED_D3.0mm | D1 |
| 1 | +12V | LED_D3.0mm | D2 |
| 1 | -12V | LED_D3.0mm | D3 |
| 3 | FerriteBead | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | FB1, FB2, FB3 |
| 3 | 100N 100n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3 |
| 3 | 10U 10u | CP_Radial_D5.0mm_P2.50mm | C4, C5, C6 |
| 2 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2 |
| 1 | 22K 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
Eurorack power busboard design files
The KiCad project lives in the robaru/eurorack-power-busboard repository on GitHub; these links point at the commit this page was built from.
Eurorack power busboard: common questions
How big is the Eurorack power busboard PCB?
The Eurorack power busboard measures 189.9 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eurorack power busboard?
26 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Eurorack power busboard design files?
From the robaru/eurorack-power-busboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Eurorack power busboard design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which robaru chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k