Beecluster 2024
robertmer4asd·beecluster_2024·cantar_schematic/cantar_oncs.kicad_sch
About the Beecluster 2024 PCB
Beecluster 2024 is an open source AVR/Arduino PCB design by robertmer4asd, published on GitHub. It is a board, with 22 components from 14 distinct parts.
Its main chip is the Clone_Mega2560_Pro_Socket, from the AVR/Arduino family. Other key parts include the YAAJ_BluePill, HX711-Cantar, SIM800L, HW-111 and LM2596T-5. By type, the board carries 10 ICs, 5 transistors, 2 resistors, 1 module, 1 connector and 1 battery holder.
From the project
Proiect pentru diagnosticarea stupilor de albine
Main components on the Beecluster 2024
Beecluster 2024 bill of materials (BOM)
22 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | YAAJ_BluePill | YAAJ_BluePill_1 | U1 |
| 1 | HX711-Cantar | HX-711 | U2 |
| 1 | SIM800L | SIM800L | U3 |
| 4 | ~ | U4, U8, U9, U10 | |
| 1 | HW-111 | HW-111 | U5 |
| 2 | LM2596T-5 | TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U6, U7 |
| 1 | Clone_Mega2560_Pro_Socket | Clone_Mega2560_Pro_Socket | A1 |
| 5 | FU9024N | TO-251-3_Vertical | Q1, Q2, Q3, Q4, Q5 |
| 1 | Conn_01x04 | CONN_4x | J1 |
| 1 | Battery | BT1 | |
| 1 | SW_SPST | SW2 | |
| 1 | Device_CP | C1 | |
| 1 | 10kΩ | R1 | |
| 1 | 2.7kΩ | R2 |
Beecluster 2024 design files
The KiCad project lives in the robertmer4asd/beecluster_2024 repository on GitHub; these links point at the commit this page was built from.
Beecluster 2024: common questions
What microcontroller does the Beecluster 2024 use?
The Beecluster 2024 is built around the Clone_Mega2560_Pro_Socket, from the AVR/Arduino family.
How many components are on the Beecluster 2024?
22 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Beecluster 2024 design files?
From the robertmer4asd/beecluster_2024 repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the Beecluster 2024 design in my own project?
The repository has no license, so all rights stay with robertmer4asd. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Beecluster 2024 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k