32 open source boards using the LM2596T-5

Real designs built with the LM2596T-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

32 boardsClear filters|Most starred

How designs wire the LM2596T-5

Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the LM2596T-5 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin has a inductor on 25 of 27 designs, most often 33 µH (then 68 µH).
  • The ON/OFF pin is tied to GND on 22 of 26 designs (a signal on 3).
  • The VIN pin has a capacitor to GND on 16 of 27 designs, most often 10 µF (then 100 nF).
VINpin 1Connected to: A connector 22% · 12V 41%
  • Capacitor to GND on 59% · 10 µF (4), 100 nF (3), 680 µF (2)
OUTpin 2Connected to: Signal 93%
  • Inductor on 93% · 33 µH (14), 68 µH (3), 22 µH (2)
GNDpin 3Connected to: GND 96%
ON/OFFpin 5Connected to: GND 85%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Usb2-power hub by dilshan, SI4684 by PE5PVB, STM32 VGM Player YM2612 SN76489 by AidanHockey5 and Rda5807m receiver by dilshan.

The LM2596T-5 in open source designs

The gallery holds 32 open source boards using the LM2596T-5 from 28 GitHub repositories; a typical one measures about 100 × 82.4 mm and carries around 55 components.

87% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Usb2-power hub by dilshan.

Microcontrollers on boards using the LM2596T-5

LM2596T-5: common questions

Where can I find a LM2596T-5 reference design?

Each of the 32 boards on this page is a real design using the LM2596T-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM2596T-5 OUT pin connected?

The OUT pin has a inductor on 25 of 27 designs, most often 33 µH (then 68 µH). Counted from the KiCad layouts of 27 open source designs using the LM2596T-5.

How is the LM2596T-5 ON/OFF pin connected?

The ON/OFF pin is tied to GND on 22 of 26 designs (a signal on 3). Counted from the KiCad layouts of 27 open source designs using the LM2596T-5.

How is the LM2596T-5 VIN pin connected?

The VIN pin has a capacitor to GND on 16 of 27 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 27 open source designs using the LM2596T-5.

What parts are used alongside the LM2596T-5?

The AMS1117-3.3, 23LC1024, BluePill_STM32F103C, CH340G and DS18B20 appear in the most repositories here.

Which microcontrollers do boards using the LM2596T-5 use?

Most are built on ESP32 (9), AVR/Arduino (4), PIC (3) and RP2040/RP2350 (1).

How big is a typical board using the LM2596T-5?

The median is 100 × 82.4 mm, and 87% are two-layer designs.

What is the most popular open source board using the LM2596T-5?

By GitHub stars, Usb2-power hub by dilshan, with 189 stars.

Can I simulate one of these boards using the LM2596T-5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part