Ferrarii
About the Ferrarii PCB
Ferrarii is an open source PCB design by RoboJackets, published on GitHub under the MIT license. It is a 2-layer board measuring 85 × 83 mm, with 53 components from 18 distinct parts.
Other key parts include the DEV-16771. By type, the board carries 20 resistors, 10 diodes, 8 connectors, 5 capacitors, 4 transistors and 3 switches.
From the project
Autonomous 3kg sumo
Main components on the Ferrarii
Ferrarii bill of materials (BOM)
53 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DEV-16771 | MODULE_DEV-16771 | U1 |
| 4 | LTV-826S | DIL8-SMD | Q1, Q2, Q3, Q4 |
| 1 | distance sensors signals | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | distance sensor power | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | line sensor power | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Start Module | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | 12vPower | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J5 |
| 1 | line sensor jst | PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | MD | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | LCD_Screen | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | 3544-2 | FUSE_3544-2 | F2 |
| 1 | TSR_1-2450 | CONV_TSR_1-2450 | PS1 |
| 1 | 1101M2S3CQE2 | SW_1101M2S3CQE2 | S1 |
| 2 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2 |
| 10 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 5 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C24, C25 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 18 | 500 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R12, R13, R14, R15, R16, R17 +10 |
Ferrarii design files
The KiCad project lives in the RoboJackets/robowrestling repository on GitHub; these links point at the commit this page was built from.
Ferrarii: common questions
How big is the Ferrarii PCB?
The Ferrarii measures 85 × 83 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ferrarii?
53 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ferrarii design files?
From the RoboJackets/robowrestling repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ferrarii design in my own project?
Yes, under the terms of its MIT license, which RoboJackets chose for the repository.
More boards in robowrestling
NXPTeam2(10-30)
107.9 × 63.2 mm112 parts2LMIT9
FewawiOwO
160 × 90 mm106 parts2LMIT9
FewawiControlBoard
106.5 × 86 mm88 parts2LMIT9
NXPRatatoulliBoard
98.3 × 59.9 mm52 parts2LMIT9
AVR/ArduinoSlippi
78.7 × 34.9 mm42 parts2LMIT9
NXPSchematic
83.5 × 57 mm30 parts2LMIT9
FewawiPowerBoard
49 × 56 mm19 parts2LMIT9
CustomML2
10 × 22 mm7 parts2LMIT9