Robotont electronics battery adapter
robotont·robotont-electronics-battery-adapter
About the Robotont electronics battery adapter PCB
Robotont electronics battery adapter is an open source PCB design by robotont, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 23.5 × 15 mm, with 1 components from 1 distinct parts.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
Adapter PCB for connecting the data pins to the Robotont gen 3 battery.
The repository contains KiCAD schematics and PCB layout for the battery adapter. By connecting the data pins, Robotont is able to communicate with the battery onewire interface and monitor the battery status. The Production folder contains prepared gerbers and BOM ready to order from e.g. JLCPCB.
Use the files in jlcpcb/productionfiles` for manufacturing and assembly.

Robotont electronics battery adapter bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GT-BTP25006-0240A-010A | GT-BTP25006-0240A-010A | J1 |
Robotont electronics battery adapter design files
The KiCad project lives in the robotont/robotont-electronics-battery-adapter repository on GitHub; these links point at the commit this page was built from.
Robotont electronics battery adapter: common questions
How big is the Robotont electronics battery adapter PCB?
The Robotont electronics battery adapter measures 23.5 × 15 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Robotont electronics battery adapter?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Robotont electronics battery adapter design files?
From the robotont/robotont-electronics-battery-adapter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Robotont electronics battery adapter design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which robotont chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k