Sous carte F429i
About the Sous carte F429i PCB
Sous carte F429i is an open source STM32 PCB design by robotronik, published on GitHub. It is a 2-layer board measuring 109.2 × 134.4 mm, with 158 components from 8 distinct parts.
Its main chip is the STM32F429i-Discovery, from the STM32 family. By type, the board carries 116 connectors, 22 resistors and 19 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
Les schémas des cartes électroniques utilisées dans nos robots
Sous carte F429i bill of materials (BOM)
158 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | CONN_01X02 | Molex_KK_6410-02 | P1, P2, P4, P5, P6, P7, P8, P12 +4 |
| 2 | CONN_01X02 | bornier2 | P3, P11 |
| 3 | CONN_01X03 | Molex_KK_6410-03 | P9, P13, P14 |
| 99 | CONN_01X01 | Pin_Header_Straight_1x01 | P10, P18, P19, P20, P21, P22, P23, P24 +91 |
| 1 | STM32F429i-Discovery | stm32f429i-disco | stm1 |
| 17 | LED | LED_0805 | D1, D2, D4, D5, D6, D7, D8, D10 +9 |
| 2 | D | Diode_DO-35_SOD27_Horizontal_RM10 | D3, D9 |
| 22 | R | R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 +14 |
Sous carte F429i design files
The KiCad project lives in the robotronik/electronique repository on GitHub; these links point at the commit this page was built from.
Sous carte F429i: common questions
What microcontroller does the Sous carte F429i use?
The Sous carte F429i is built around the STM32F429i-Discovery, from the STM32 family.
How big is the Sous carte F429i PCB?
The Sous carte F429i measures 109.2 × 134.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sous carte F429i?
158 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sous carte F429i design files?
From the robotronik/electronique repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sous carte F429i design in my own project?
The repository has no license, so all rights stay with robotronik. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sous carte F429i without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in electronique
STM32Sous-Carte Asservissement (2A, moteurs CC)
121.9 × 130.5 mm90 parts2LNo license1
Carte Actionneurs-Capteurs
108 × 102 mm66 parts2LNo license1
AlimDetect 4c
115.6 × 73.7 mm63 parts2LNo license1
Carte Alim
102.9 × 70.5 mm58 parts2LNo license1
STM32Brushless board
60 × 62.5 mm57 parts2LNo license1
AlimDetect 2c
83.8 × 41.9 mm36 parts2LNo license1
STM32Sous-Carte STM32
117.5 × 123 mm33 parts2LNo license1
LiPo module
61.5 × 38.6 mm9 parts2LNo license1
Shield 75
35.6 × 21.6 mm8 parts2LNo license1
RC Freescale
21 × 5.1 mm4 parts2LNo license1
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k
STM32Brain board STM32F407
61.8 × 73.2 mm69 parts2LGPL-3.01.2k