Carte Alim
About the Carte Alim PCB
Carte Alim is an open source PCB design by robotronik, published on GitHub. It is a 2-layer board measuring 102.9 × 70.5 mm, with 58 components from 20 distinct parts.
Other key parts include the LM2903 and 7805. By type, the board carries 13 connectors, 12 diodes, 7 resistors, 6 capacitors, 3 ICs and 2 fuses.
It belongs with the robotics & motion designs in this gallery.
From the project
Les schémas des cartes électroniques utilisées dans nos robots
Main components on the Carte Alim
Carte Alim bill of materials (BOM)
58 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM2903 | DIP-8__300 | U3, U4 |
| 1 | 7805 | Pin_Header_Straight_1x03 | U100 |
| 7 | CONN_01X02 | bornier2 | P1, P2, P3, P9, P10, P11, P12 |
| 1 | CONN_01X05 | bornier5 | P4 |
| 4 | CONN_01X01 | PIN_ARRAY_1 | P5, P6, P7, P8 |
| 1 | CONN_01X04 | PIN_ARRAY_4x1 | P13 |
| 2 | C | C2 | 0.01u1, 0.47u1 |
| 6 | R | R4 | 1k1, 1k2, 5k1, 5k2, 5k3, 5k4 |
| 5 | CP1 | CP4 | 15u1, 15u2, 15u3, 180u1, 180u2 |
| 1 | INDUCTOR | C2 | 22u1 |
| 2 | FUSE | FUSE5-20 | F1, F2 |
| 1 | CONN_01X03 | PIN_ARRAY_3X1 | K1 |
| 3 | LED | LED-3MM | D1, D2, D3 |
| 2 | ZENER | D4 | D4, D7 |
| 2 | LED_VERT | LED-3MM | D5, D8 |
| 2 | LED_ROUGE | LED-3MM | D6, D9 |
| 2 | DIODE | D4 | D10, D11 |
| 1 | DIODESCH | D4 | D12 |
| 6 | C | C2 | C1, C3, C5, C6, C7, C8 |
| 7 | R | R4 | R1, R2, R3, R4, R5, R7, R254 |
Carte Alim design files
The KiCad project lives in the robotronik/electronique repository on GitHub; these links point at the commit this page was built from.
Carte Alim: common questions
How big is the Carte Alim PCB?
The Carte Alim measures 102.9 × 70.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carte Alim?
58 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carte Alim design files?
From the robotronik/electronique repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Carte Alim design in my own project?
The repository has no license, so all rights stay with robotronik. Use it as a reference, and ask the author before reusing the design.
More boards in electronique
STM32Sous carte F429i
109.2 × 134.4 mm158 parts2LNo license1
STM32Sous-Carte Asservissement (2A, moteurs CC)
121.9 × 130.5 mm90 parts2LNo license1
Carte Actionneurs-Capteurs
108 × 102 mm66 parts2LNo license1
AlimDetect 4c
115.6 × 73.7 mm63 parts2LNo license1
STM32Brushless board
60 × 62.5 mm57 parts2LNo license1
AlimDetect 2c
83.8 × 41.9 mm36 parts2LNo license1
STM32Sous-Carte STM32
117.5 × 123 mm33 parts2LNo license1
LiPo module
61.5 × 38.6 mm9 parts2LNo license1
Shield 75
35.6 × 21.6 mm8 parts2LNo license1
RC Freescale
21 × 5.1 mm4 parts2LNo license1
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979