Sous-Carte STM32
About the Sous-Carte STM32 PCB
Sous-Carte STM32 is an open source STM32 PCB design by robotronik, published on GitHub. It is a 2-layer board measuring 117.5 × 123 mm, with 33 components from 7 distinct parts.
Its main chip is the STM32F407-Discovery, from the STM32 family. By type, the board carries 13 diodes, 13 resistors and 6 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
Les schémas des cartes électroniques utilisées dans nos robots
Sous-Carte STM32 bill of materials (BOM)
33 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RJ45 | RJ45_8 | J1 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04 | P1 |
| 3 | CONN_01X02 | bornier2 | P3, P5, P6 |
| 1 | CONN_02X25 | Pin_Header_Straight_2x25 | P7 |
| 1 | STM32F407-Discovery | STM32F407 | stm321 |
| 13 | LED | LED-3MM | D1, D2, D3, D4, D5, D6, D7, D8 +5 |
| 13 | R | R4 | R1, R2, R3, R4, R5, R6, R7, R8 +5 |
Sous-Carte STM32 design files
The KiCad project lives in the robotronik/electronique repository on GitHub; these links point at the commit this page was built from.
Sous-Carte STM32: common questions
What microcontroller does the Sous-Carte STM32 use?
The Sous-Carte STM32 is built around the STM32F407-Discovery, from the STM32 family.
How big is the Sous-Carte STM32 PCB?
The Sous-Carte STM32 measures 117.5 × 123 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sous-Carte STM32?
33 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sous-Carte STM32 design files?
From the robotronik/electronique repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sous-Carte STM32 design in my own project?
The repository has no license, so all rights stay with robotronik. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sous-Carte STM32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in electronique
STM32Sous carte F429i
109.2 × 134.4 mm158 parts2LNo license1
STM32Sous-Carte Asservissement (2A, moteurs CC)
121.9 × 130.5 mm90 parts2LNo license1
Carte Actionneurs-Capteurs
108 × 102 mm66 parts2LNo license1
AlimDetect 4c
115.6 × 73.7 mm63 parts2LNo license1
Carte Alim
102.9 × 70.5 mm58 parts2LNo license1
STM32Brushless board
60 × 62.5 mm57 parts2LNo license1
AlimDetect 2c
83.8 × 41.9 mm36 parts2LNo license1
LiPo module
61.5 × 38.6 mm9 parts2LNo license1
Shield 75
35.6 × 21.6 mm8 parts2LNo license1
RC Freescale
21 × 5.1 mm4 parts2LNo license1
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k